2021+ Bronco ForScan Thread

[Loesch]

Nice, what changes did you do? My main ones I want to do are the dreaded double honk and sport mode

I disabled double honk, both front seat belt warnings, lowered turn signal volume, enabled sport mode, disabled door ajar chime, and disabled key in ignition / triple ding at startup chimes. Now it's perfect. Reminds of the way vehicles used to be before all this tech and obsessiveness over safety.

Sponsored

 

[Loesch]

I just noticed that there is a duplicate entry in the FORScan Google Sheets document that I believe everyone is still referencing. On the Common Features sheet, "Disable key-in ignition chime" and "Disables Triple Ding at Start up (Doo, doo, doo)" are the same value. Maybe just rename "Disable key-in ignition chime" to "Disable triple ding at Start up" and delete the other one?

 

[Desert runner]

Has anyone looked into disabling traction/stability control entirely with forscan?
Holding down the button for 7 seconds and verifying that advancetrak is off isn't actually disabling anything, it lessens some of the effects but it's still there.
Was thinking it would be nice to maybe just edit a goat mode so it's only disabled in the modes you really don't want it on.
Also found out that when you disable advancetrak it also conveniently disables the cruise control for you, so I'd definitely want it to be selectable rather than permanent...alternatively, some way to not disable cruise control would work if it had to be a permanent/physical mod like cutting a wire or pulling a fuse.

If you find a way please let me know, i need this more than any other change from forscan !

 

[Loesch]

If you find a way please let me know, i need this more than any other change from forscan !

I have a feeling your best bet would be to remove the fuse for the ABS system but like was mentioned, that causes other problems and warnings.

 

[cbailey3160]

All right, I need some help here. While changing the tire size, I believe that’s what triggered this. I started throwing codes, one in the ABS system and one in the PCM. The ABS DTC cleared immediately but the one in the PCM is a little more persistent it’s a DTC P160A. I wasn’t even in the PCM. Only the BCM which I return to the factory as belts. Is anybody familiar with this code? Is there anyway I can clear it? The book is five hours for this thing.

 

[cbailey3160]

Hey, so I search the DTC code and got a nice video on how to fix it. So you guys don’t worry about little old me

 

[Brian_B]

Hey, so I search the DTC code and got a nice video on how to fix it. So you guys don’t worry about little old me

So what was the fix? Relearn on PCM/TCM?

 

[coadr]

If anyone with a Badlands High/Lux (12 inch screen, or maybe it doesn't matter) has the default values for APIM 7D0-02-03 and could share them I'd appreciate it!

 

[mpeugeot]

If anyone with a Badlands High/Lux (12 inch screen, or maybe it doesn't matter) has the default values for APIM 7D0-02-03 and could share them I'd appreciate it!

I don't think that it matters, but here is my 2 door 2021 Bronco OBX Lux package.

7D0-02-03 A040 0000 00BC

 

[redone17]

Saw this on FB. I guess some point in 2023 or so they made Auto High Beams fade on/off. My 2021 is very abrupt.

 

[Fly by Nite]

Saw this on FB. I guess some point in 2023 or so they made Auto High Beams fade on/off. My 2021 is very abrupt.

Interesting. My March '23 built Base would ramp on/off. It bugged me so I just turned the auto function off. My issue was I didn't notice the auto hi/low switching. So I often 'dimmed' my hi-beams when I was actually turning them on when traffic approached. Maybe I should just have more faith in the hi beam 'nanny'.

 

[redone17]

Interesting. My March '23 built Base would ramp on/off. It bugged me so I just turned the auto function off. My issue was I didn't notice the auto hi/low switching. So I often 'dimmed' my hi-beams when I was actually turning them on when traffic approached. Maybe I should just have more faith in the hi beam 'nanny'.

That’s an interesting outlook. Makes sense. Perhaps I’ll just leave it as is. I felt sometimes it’s on and off so much it’s like a strobe.

But, good to know you can disable it.

 

[Conoger]

Hmm Nobody Posted here for a while.
I removed my back seats in my 2023 Badlands and took out the seatbelts.
RCM Changes
737-02-01 - From C76A-EE33-70-- to C76A-EE33-10-- no longer throws DTC for Seat Beat Buckles not being present.
737-02-02 - From 0CE6-8102-00-- to 0C66-8002-00-- no longer throws DTC for unplugged Passenger and Driver side pretensioners.
Best Bonus - Airbag light goes out on Dash.
Used the F150 guide to help puzzle this out.

 

[Texasgrillchef]

Hmm Nobody Posted here for a while.
I removed my back seats in my 2023 Badlands and took out the seatbelts.
RCM Changes
737-02-01 - From C76A-EE33-70-- to C76A-EE33-10-- no longer throws DTC for Seat Beat Buckles not being present.
737-02-02 - From 0CE6-8102-00-- to 0C66-8002-00-- no longer throws DTC for unplugged Passenger and Driver side pretensioners.
Best Bonus - Airbag light goes out on Dash.
Used the F150 guide to help puzzle this out.

Doesnt sound safe to me. If for some reason something breaks and is no longer working you wont inow about it until its to late.
you could be involved in an accident and it wouldnt be good if the seatbelts didnt work properly and or the airbag didnt deploy because of sn issue you werent aware about.

Sure we hate all the nags about seatbeltd and airbags and all the lights that are on etc... u til its to late.

As a former oaramedic i have seen it happen. people disabling all the warnings and then never know when something is t working properly only to find out when they need it. thst it isnt working and now their loved one is dead.

 

[Conoger]

Doesnt sound safe to me. If for some reason something breaks and is no longer working you wont inow about it until its to late.
you could be involved in an accident and it wouldnt be good if the seatbelts didnt work properly and or the airbag didnt deploy because of sn issue you werent aware about.

Sure we hate all the nags about seatbeltd and airbags and all the lights that are on etc... u til its to late.

As a former oaramedic i have seen it happen. people disabling all the warnings and then never know when something is t working properly only to find out when they need it. thst it isnt working and now their loved one is dead.

To be clear, the changes I made to the Forscan programming are just telling the Bronco that the Seat Belt hardware, (Buckles and Shoulder straps). are not present on the vehicle, which were physically removed with the rear seats. The 2nd row Air bags are still present and active.

Sponsored