- First Name
- Bud
- Joined
- Aug 18, 2021
- Threads
- 9
- Messages
- 78
- Reaction score
- 34
- Location
- tallahassee
- Vehicle(s)
- bronco
- Your Bronco Model
- Base
- Banned
- #901
Anyone need a hand in North Florida I can help out. You buy beer/im no expert.
Sponsored
The calculations don't add up correctly for some reason, but 2911 is way to high and not possible. There is a limit to the size you can change.I also reset tire size and had a code keep coming up.
Any time I go over 2890 on the circumference a “Service AdvanceTrac” warning pops up on the dash. I’m supposed to be at 2911 for my tires (KM3 37’s with actual of 36.5”) but the calc shows max size I can really put before the warning is for 36.25” tires.
Interesting. I wonder why the website would be off that much.The calculations don't add up correctly for some reason, but 2911 is way to high and not possible. There is a limit to the size you can change.
Set it at 2800 and check it against a GPS app. This is where I have mine set with 37's and its perfect. It should be very close for you and then you can adjust it little by little from there.
It's not the website that is wrong. Even with all the correct math, it just doesn't match up in forscan for some reason. Its almost like the programming in the module is just wrong or something, I'm not sure. Mine were suppose to be over 2900 also, but after a lot of trial and error the number needed was much lower.Interesting. I wonder why the website would be off that much.
I’ll do the gps check and see where that gets me.
Cool thanks I’ll give it a shotIt's not the website that is wrong. Even with all the correct math, it just doesn't match up in forscan for some reason. Its almost like the programming in the module is just wrong or something, I'm not sure. Mine were suppose to be over 2900 also, but after a lot of trial and error the number needed was much lower.
I played with the tire size settings until the GPS matched the speed. All the math, and measurements in world doesn’t seem to matter with the Factory settings on these Broncos.The calculations don't add up correctly for some reason, but 2911 is way to high and not possible. There is a limit to the size you can change.
Set it at 2800 and check it against a GPS app. This is where I have mine set with 37's and its perfect. It should be very close for you and then you can adjust it little by little from there.
The statement you are getting is because Forscan does not know all of the 2023 information. You can get an extended license from the Forscan group, then send them an E-mail with your VIN and they can fix that for you.Need some help here. I just tried to do some work on a 2023 Badlands and FORScan would not connect to the truck. It said enter the PCM # or tune type. This truck is still factory fresh. What is going on here? I am running a Win 11 PC with FORScan beta 2.4.6. Should I be running 2.3.52?
I don't believe there's an option for that, but you can get a module to bypass the motion lock on the cameras and turn them on whenever you want.Is there a way to have the camera turn when the front sensor warning comes on while in drive?