2025 Full Digital Cluster successfully installed - swapped into 2022 Wildtrak

[Ducati1098]

I do find it almost comical how bad even the 2025 digital cluster is compared to the one in my 2022 Mustang.
It's like VGA graphics compared to 1080P (or 1080P compared to 4K, take your pick)

(And yes, I know it's likely higher res than VGA )

It does look a lot better in person. I don’t think the pictures I posted really do it any favors lol they were just quick ones I took.

Sponsored

 

[ChrisB351]

For me, just over $800. But I get parts at cost and don’t pay labor. I don’t know what it would cost someone else. Depends on the parts markup and labor.

I work for an independent shop but get pretty good discounts at my local Ford dealer. We dont have fdrs here but I know some people that do and will help. Im gonna have to look into this.

 

[TLO]

Okay.... How much did this cost ya? Lol
You need the display plus the module I assume?

 

[Ducati1098]

Okay.... How much did this cost ya? Lol
You need the display plus the module I assume?

The display is its own module, all in one.
Price will likely be different for most people. I get parts at cost.

 

[zombie]

It does look a lot better in person. I don’t think the pictures I posted really do it any favors lol they were just quick ones I took.

Oh I'm sure it does, but I've looked at pics I've taken of the cluster on the mustang and it looks way better (comparing picture to picture)

Just about anything is an improvement over the 21-24 Bronco Dash (for modern digital clusters, anyway)

 

[MWILD]

Oh I'm sure it does, but I've looked at pics I've taken of the cluster on the mustang and it looks way better (comparing picture to picture)

Just about anything is an improvement over the 21-24 Bronco Dash (for modern digital clusters, anyway)

I don't know man...looks like SVGA...

 

[RustysBronco]

After having the new cluster for a little while, I finally had time to try and make this swap work.

I haven't had a lot of time to go through everything or look in forscan to see what else I may be able to change/adjust on it, but overall I'm thrilled with the results.
This cluster (IMO) looks a million times better.
So far everything seems to be functioning as it should. All the goat modes work flawlessly.
Honestly the worst part of the whole cluster is that it shows a moar door for its goat mode transition images Hoping there's a way to change that, but considering I used a Stroppe VIN for programming, I'm guessing there isn't (Thanks Ford)

I'm waiting for the new cluster bezel trim piece since this new digital one uses the same one as the Braptor digital cluster now, then I'll mess around with it more and give any updates.

View attachment 714530 View attachment 714531

Is that a raptor cluster?

 

[Ducati1098]

Is that a raptor cluster?

25MY non-raptor cluster.
This is what all regular Broncos will come with now

 

[Squatch]

It's like half the responders can't read. Do you all work for Ford?

@Ducati1098 - Thank you! This is good news, but not great unless you get all the features working (temps on screen, etc) and Ford puts a two-door on the screen or someone cracks it to put custom images/animations.

 

[Ducati1098]

@Ducati1098 - Thank you! This is good news, but not great unless you get all the features working (temps on screen, etc) and Ford puts a two-door on the screen or someone cracks it to put custom images/animations.

Unfortunately I don’t think the numbers/temps or the 2 door images will happen.
Even this digital cluster doesn’t seem more “user programmable” It just is what it is.

 

[RustysBronco]

It's like half the responders can't read. Do you all work for Ford?

 

[Wilbur's son]

Another great reason to spend money on my '22. Yes, much better display. Just emailed my buddy at the local dealership parts dept. Hope it also works for manual trans.

 

[mikec426]

I suppose I could mount my Ford ProCal to give me numbers…

 

[Ducati1098]

I suppose I could mount my Ford ProCal to give me numbers…

That’s what I’ll end up doing. Personally I’m not overly worried about seeing them to begin with. But I have a procal anyway, so might as well use it for the gauges

 

[mpeugeot]

Really very tempted to do it just for the tach, even though I really don't miss it with the automatic transmission.

Looks great though.

Sponsored