Sponsored
Sponsored
- First Name
- Gary
- Joined
- Jan 27, 2021
- Threads
- 24
- Messages
- 191
- Reaction score
- 104
- Location
- Dallas, Tx
- Vehicle(s)
- Bronco Badlands, Harley Trike, Mustang
- Your Bronco Model
- Badlands
And you can still put your roof on with this thing on, or u have to remove it to put your roof on?
- First Name
- Brian
- Joined
- Jan 12, 2023
- Threads
- 2
- Messages
- 21
- Reaction score
- 5
- Location
- San Diego, California
- Vehicle(s)
- 2022 Everglades
- Your Bronco Model
- Everglades
Anyone have any tips or tricks on removing the C Pillar moulding? Seems like you have to at least remove some additional moulding prior to removing the c pillar cross bar moulding....
Sponsored
Moredoor 2022+ only unless you want to get crafty and drill, threadsert, etc. I bought the rear only roll bar brace kit thinking it would work on two door but the roll bar angle is different and the roll bar would need to be drilled/threaded. I’m in Denver Colorado and would sell for $400 if there’s someone local or coming through that’s interested. To ship it would be a pretty penny as the box needed to ship is huge but not particularly heavy. Let me know, thanks.
DV8 has something similar and even has a rear set grab handle attached to theirs.
https://dv8offroad.com/collections/.../products/6th-gen-bronco-overhead-molle-panel
https://dv8offroad.com/collections/.../products/6th-gen-bronco-overhead-molle-panel
The bummer with the front overhead B pillar kits from Ford and others is with the top down the true fully open top/air/sky experience is ruined by the cross bar(s) right over your head. The rear kit does have merits in triangulating the rear roll bar section which probably provides some additional rear gate/hinge/spare tire mount rigidity.
- First Name
- Coady
- Joined
- Jan 26, 2022
- Threads
- 4
- Messages
- 355
- Reaction score
- 682
- Location
- Denver, CO
- Vehicle(s)
- 2022 Ford Bronco Badlands
- Your Bronco Model
- Badlands
I could be interested! Just need to determine if it works with my AAL cargo shelf first.Moredoor 2022+ only unless you want to get crafty and drill, threadsert, etc. I bought the rear only roll bar brace kit thinking it would work on two door but the roll bar angle is different and the roll bar would need to be drilled/threaded. I’m in Denver Colorado and would sell for $400 if there’s someone local or coming through that’s interested. To ship it would be a pretty penny as the box needed to ship is huge but not particularly heavy. Let me know, thanks.
Sponsored
I’d be happy to mock it up with you. If the shelf uses any of the three threaded holes below the speaker housings on the downward rearmost roll bar tubes then probably not…
Looks like AAL has a version for BRaptor which comes with the same brace from the factory so if you’re really wanting the brace you might be able to get BRaptor brackets from AAL.
- Joined
- Aug 13, 2021
- Threads
- 1
- Messages
- 353
- Reaction score
- 499
- Location
- Colorado Springs
- Vehicle(s)
- 2021 Ford Bronco, 2004 Volkswagen R32
- Your Bronco Model
- Badlands
I'm definitely interested. I live down in Colorado Springs, was planning to drive up there soon to go to Microcenter. Got all the hardware from the kit?Moredoor 2022+ only unless you want to get crafty and drill, threadsert, etc. I bought the rear only roll bar brace kit thinking it would work on two door but the roll bar angle is different and the roll bar would need to be drilled/threaded. I’m in Denver Colorado and would sell for $400 if there’s someone local or coming through that’s interested. To ship it would be a pretty penny as the box needed to ship is huge but not particularly heavy. Let me know, thanks.
I need more of this in my life? More pics and specs!My 42 dodge flexed so much the tailgate would open on big bumps
and no it wasn’t work out bushings
it wasn’t designed to do 75 either
moving the flex makes other issues too
Sponsored
Similar threads
