- Thread starter
- #1
just installed the front mud flaps from Mabett. its a Black Dimond with a 2 inch lift and running 315 (35) tires. have rubbing before full lock ( turning for parking ) any suggestions?
Sponsored
Sponsored
- Joined
- Dec 10, 2021
- Threads
- 6
- Messages
- 36
- Reaction score
- 75
- Location
- Boulder, CO
- Vehicle(s)
- 2024 Bronco Badlands
- Your Bronco Model
- Badlands
Don't buy Mabett things
I had this issue, just stuck it with black silicone 
, i think now if the silicon got damaged the plastic is pulled back due to it being stuck there for months and it should be ok
, i think now if the silicon got damaged the plastic is pulled back due to it being stuck there for months and it should be ok
Sponsored
- First Name
- Jared
- Joined
- Feb 20, 2023
- Threads
- 45
- Messages
- 6,586
- Reaction score
- 12,642
- Location
- Denton, TX
- Vehicle(s)
- 2023 2dr Badsquatch
- Your Bronco Model
- Badlands
I sawzall you did there...
- First Name
- Robert
- Joined
- May 26, 2021
- Threads
- 2
- Messages
- 464
- Reaction score
- 839
- Location
- Los Angeles
- Vehicle(s)
- 2018 Colorado ZR2
- Your Bronco Model
- Badlands
Its just self-clearing. It will stop eventually.
Sponsored
- First Name
- Coady
- Joined
- Jan 26, 2022
- Threads
- 4
- Messages
- 355
- Reaction score
- 682
- Location
- Denver, CO
- Vehicle(s)
- 2022 Ford Bronco Badlands
- Your Bronco Model
- Badlands
My AT4Ws rub on the mounting screws for my RokBlokz, but only when the wheels are turned and the suspension compresses
Looks like aftermarket wheels with a ton of poke????
... yep, that's what will happen if you do that.
Having the wheel stick that far out makes that big ol' tire swing in a massive arc compared to the stock offset wheels.
+30 or 35mm offset should work.
(factory Squatch is +30mm ) I run/ran the Methods with +35 with zero lift, 35x11.5-17 Toyos. Ford mudflaps are not an issue with this set up.
+55 might give a bit of rub on the sway bar. (All the other factory wheels are +55mm , including the Badlands on 33's )
... yep, that's what will happen if you do that.
Having the wheel stick that far out makes that big ol' tire swing in a massive arc compared to the stock offset wheels.
+30 or 35mm offset should work.
(factory Squatch is +30mm ) I run/ran the Methods with +35 with zero lift, 35x11.5-17 Toyos. Ford mudflaps are not an issue with this set up.
+55 might give a bit of rub on the sway bar. (All the other factory wheels are +55mm , including the Badlands on 33's )
Also, thread title had me hoping for a bit more action. 
Sponsored