- Joined
- Apr 26, 2024
- Threads
- 1
- Messages
- 6
- Reaction score
- 14
- Location
- Miami Beach
- Vehicle(s)
- 2024 Ford Bronco
- Your Bronco Model
- Heritage
- Thread starter
- #1
As a new entrant to the world of removable doors, I unfortunately caused a few chips/scratches while doing the process solo. I used the two tiny rubber fender protectors, but obviously they did not provide the coverage necessary.
I went over to the local hardware store and purchased some cheap clear plastic tubing with a 5/16" inner diameter and a 7/16" outer diameter, and spliced it down the middle. It worked like a charm, and I think this solution can help prevent me from doing any further damage.
Here's a photo of one on the body side, but when I do remove/reinstall the doors I slip a length on both the door and body side.
I went over to the local hardware store and purchased some cheap clear plastic tubing with a 5/16" inner diameter and a 7/16" outer diameter, and spliced it down the middle. It worked like a charm, and I think this solution can help prevent me from doing any further damage.
Here's a photo of one on the body side, but when I do remove/reinstall the doors I slip a length on both the door and body side.
Sponsored