Our team in back has removed and installed plenty of shocks on this Bronco. I am confident they are doing their job correctly.I hope you removed the axle nut and pushed out the stub!!!
Sponsored
Our team in back has removed and installed plenty of shocks on this Bronco. I am confident they are doing their job correctly.I hope you removed the axle nut and pushed out the stub!!!
That there is a fine, respectable looking setupLadies and gentleman..... removal has been completed.
Then I got shewed out of the R&D bay.
![]()
Yeah it's too high.Seems a bit too high? Can’t tell if those are 37s.
I wasn’t planning on going bigger than my 35s due having to throw more money at steering, stronger cvs, and list goes on. Just wanted better shocks. My 35s would look like Geo metro tires on that lift.Yeah it's too high.
I kind of want to buy a set of 42's and see what happens.
You can lower it about an inch and a half, maybe two from that height. I'm not going to mess with it until the springs have a chance to settle. It will also look better with the 40" mickey thompson's. I'll take a few pics with them I get them mounted.I wasn’t planning on going bigger than my 35s due having to throw more money at steering, stronger cvs, and list goes on. Just wanted better shocks. My 35s would look like Geo metro tires on that lift.
I guess let’s see how things progress.![]()
We had to add another inch of preload on our coils as we were bottoming out way too easily. Sucker is ridiculously high now. Probably seven feet tall at the roofYeah it's too high.
I kind of want to buy a set of 42's and see what happens.
This is with the portals installed, right? If not, my 37” KO2s are gonna look like toys!This is the lift right out of the box. The ride home they are noticeably stiffer than the eibachs. I expected this because I got the stiffer rear springs to deal with the weight of all my crap. Plus I have about 250 pounds of bumper, skid plates, and step sliders I’m going to be adding in the next week.
![]()
Did you have the standard springs and try dialing in the low speed compression?We had to add another inch of preload on our coils as we were bottoming out way too easily. Sucker is ridiculously high now. Probably seven feet tall at the roof