Fog Light Location

[Taco2Bronco]

I see that everyone seems to go with three sets of fog lights on their modular bumper. Does anyone know about a modular bumper fog light kit that is just one light?

Sponsored

 

[TrailRaider]

Most likely you will need to buy either the 3 light bracket and mount just one light, or buy the 3 per side kit and just use whichever light you prefer. I have seen 3 light kits from nearly every company under the sun and maybe one or two double light kits. Yesterday I installed the Mabett "Raptor" style kit. I prefer the factory styling vs the mega-lights style. People like lots of lights, so that's what company's are making.

 

[604Bronco]

There’s some folks who mounted a single small light bar in there. It looks not bad, but not my style. There’s a lot of room in those “pockets” so that’s why you see most running 2-3 light pods. You could probably get the 3 light bracket and custom make some sort of filler piece, if you really wanted to go that route.

 

[GlueBoy]

I don't know of any large singular unit lights besides the mini bars like 604 described.

 

[BadlandSas-SS]

Have you seen this?

 

[4x4TruckLEDs.com]

I see that everyone seems to go with three sets of fog lights on their modular bumper. Does anyone know about a modular bumper fog light kit that is just one light?

We offer a 6" light bar per side:

https://www.4x4truckleds.com/diode-...-w-kr-off-road-brackets-for-2021-ford-bronco/

But one fog light in the opening doesn't look right in my opinion. So that's why you don't really see it. We DO offer the components so you COULD do it

Brackets: https://www.4x4truckleds.com/kr-off...ckets-for-2021-ford-bronco-hd-modular-bumper/

Lights...

Baja Designs Squadron: https://www.4x4truckleds.com/led-driving-fog-lights/baja-designs/

Diode Dynamics SS3: https://www.4x4truckleds.com/led-auxiliary-lights/diode-dynamics/

Harness: https://www.4x4truckleds.com/vehicle-specific/ford/ford-bronco/2021-bronco/wire-harnesses/

So you could do it easily.

If you want an exact Item list let me know and I can put together a list for you (best to contact me directly to go over lighting options)

 

[Taco2Bronco]

Thank you!
In my opinion the three Baja Design (or Rigid) lights look cramped in there…especially the outermost one. Might go with two or the suggested light bar. Thanks.

 

[Headsong]

@Diode Dynamics has a single unit kit with three lamps... Several price points, easy install.

 

[BroncoBoy22]

Made my own solution using one round fog which isn’t really available anywhere. I like this look better since it’s less cramped IMO

 

[Bigmoose]

Check out my thread here:

https://www.bronco6g.com/forum/threads/alternate-fog-pocket-solution-installed.28897/

I think this looks clean but gives you both white and yellow fogs. I ended up swapping out my KR bracket with one from Greenlane offroad. I highly recommend the greenlane bracket. It is less expensive. Its powdercoated aluminum. And lastly it takes into account the slight up sweep of the mod bumper; so your lights end up horizontal instead of slightly tilted.

 

[4x4TruckLEDs.com]

Thank you!
In my opinion the three Baja Design (or Rigid) lights look cramped in there…especially the outermost one. Might go with two or the suggested light bar. Thanks.

This kit uses 1x 3" and 2x 2" pods:

https://www.4x4truckleds.com/diode-...ad-bezel-flush-brackets-for-2021-ford-bronco/

We also offer this kit with 2x 2" pods:

https://www.4x4truckleds.com/diode-...-w-kr-off-road-brackets-for-2021-ford-bronco/

 

[Taco2Bronco]

This is super helpful, thank you!

 

[IDyeti]

I didn't like the cramped look of the triple 4 led lights and looks wise I couldn't do the 4-2-2 or the 4-4-2 lights. So went with Morimoto 4 bangers.

Sponsored