Yeah..someone mentioned that there may be a setting for Fogs with DRL which would work for me I think.
This post talks about it, I think you'd want 0202 in BdyCM 726-42-01 to use the fog switch, and to have Fogs on with DRLs, but the fogs will be on anytime the DRL's were on, you wouldn't be able to turn them off separately.
If you watch my video I just posted on here yesterday from Youtube you will see where to Tap into the Factory Fog wires. I used *Posi-Taps* (See video at 0:44 secs) to tap the wires and wrapped them up in friction tape to keep them protected. I used a Blue Wire to the Factory Brown wire, and Yellow to the Factory Yellow/Org wire. I figured Blue to Brown sounded good since thats all I had and I didn't want to use black or red etc.
You can Enable the Fogs to be on with just the Running Lights and even with them off I believe. If you see my install video I posted you will see them on with the DRL/running lights.
Thanks I'll take a look. I have factory fog lights already, so I'll have to look into the settings and see what Else I can find.
Yes I use the automatic on and use the fog button on factory switch to turn them on. I didn't change the forscan code to remember what last setting was. Once I turn the lights off completely the Fogs remain off once you turn the lights back on. I'm sure you can change that but I don't mind it.
I actually just did this. Made the harness myself. I have the white light going to the factory switch and then I have the amber light going up to the aux 3 switch. Best of both worlds. Dont forget the updated switch with the fog light button and the forscan update to turn on the fog light option. Cheers.Looks like I found the factory fog light wire so I won’t need to splice in after all now I just need to create a harness to connect the mabbet, taking the wires for both white lights Dorman to factory molex.
Need to replace this female as it’s the wrong size with the factory fog female
Then make a dorman pigtail male. Then pull the white wires from the fog light dorman attach it to the female Dorman and all should work I believe
You harness looks much cleaner than mine, I sent Amber to Aux 6, and white to factory fog switch, although I do have the front/rear fog switch, I will just reserve that for future use. I do think its great to have it setup this way, I enabled DRL and turn and it works well.I actually just did this. Made the harness myself. I have the white light going to the factory switch and then I have the amber light going up to the aux 3 switch. Best of both worlds. Dont forget the updated switch with the fog light button and the forscan update to turn on the fog light option. Cheers.
What do you mean by cut the switch off? Which switch, Factory fog switch or Auxiliary switch? If it’s grounded properly lights should switch on/off every time. Not clear on your wiring or setup, but it sounds like you spent time wiring it properly and checking connections so may it is the light assembly.
What position is the headlight lamp in when you turn the fog switch on? Can you try having the headlights in the on position, turn on the fog light switch, confirm its illuminated in the dash and then check power to the harness?
