Search results

just to be clear - your tranny issues were BEFORE the service at Hilbish or AFTER?

i would inspect brake fluid but wouldnt have that high on list to change. diffs, tranny, and transfer case 100% as you don't know its wheeling history

They plan to stock (not make to order) all replacement parts. Per Turn. I'd suggest they use Vibra-tite products instead of loctite but I'm partial to our own products :wink:

Update on warranty - from Turn, I also subsequently asked about replacement part availability: We are working on the warranty form now, should be on the website next week. But basically this is how it will go. 2 year warranty on all wearable parts. Axles, bearings, seals etc. If they wear out...

I see these are available for pre-order. No information on warranty has been posted. I know someone on this forum had a leaker (or a picture of one). I've reached out to Turn regarding warranty. Specifically how they would compare to 74weld's warranty. Will update if I hear.

I can measure if you think that will be helpful - distance from plug to plate

I have the full set of IAG minus the rear diff and the front one up to the bumper (have a different aftermarket from barnes). You have access to the drain plug, pretty easy to get to. it will make a mess tho if the case is full. it is nearly impossible to keep the skid plates clean unless...

did you adjust the angle before you stuffed and weathstripped?

volkswage cc had issues with its windows, but aurora did not. I've found I do check and adjust the angle from underneath the door occasionally and that helps keep them tight and not wobble. The window reset is required every now and then. just did it on the passenger rear as it would not...

and memories of sticky red assembly lube

they would also say ford performance on the outer, if Im not mistaken

How close are you to mindelo?

RMFT!

i'd like to hear the tire feedback when available. You certainly got a color scheme going there! They fit perfectly

my front is on the front bumper and moveable on the fly and can point back at the front tires using an extension. my rear is mounted underneath kinda near the transfer case (on aftermarkrt skid) and shows the rear diff and rear tires

sounds right. the ford performance winch install direction way

I didn't use 1", I don't recall what I used but it fit tight. I also ran mine up along the front cornerbefore the wheel well. IT's pretty obvious area to use and runs right up along the battery

solid

mine are in corrugated wire loom

I only see 2 reviews on the WC 3.5 LT kit. Wondering if yall have any updates. Was about to pull the trigger on the baja designs kit but saw the 3.5 and the 5" WC kit.