Sway Bar Disconnect Wire Connector/plug type.

[andersman02]

Does anyone know what type of wire connectors/plugs are used on the sway bar disconnect? There are 3 plug ON the disconnect, and 1 from the harness to the vehicle side harness. It does not seem that you can order this harness by itself.

Going to add a sway bar disconnect to a big bend and some of the ones I'm finding do not come with the harness.

Sponsored

 

[PWillette]

@flip may be able to help...

 

[flip]

MB3Z-2B325-B

 

[andersman02]

MB3Z-2B325-B

Very helpfull- Thank you! Would you by chance have the diagram and or/ harness part number that this plugs into (vehicle side)

 

[flip]

Depending on your configuration, the body side of the harness is the whole under hood mess. It's specific to your build date, engine, camera setup and fog or no fog. Those have a list price anywhere between $900-$1,100.

C1415 is a 12 cavity Molex MX150

C1416

 

[PWillette]

Once again @flip produces...yet to be stumped!

 

[flip]

Forgot to add this.

 

[andersman02]

@flip
VERY nice,
Do you have the connector type for C1294A/B and C1295A/B?

This is for a 22 badlands VIN 1FMEE5DH0NLB10665

 

[8rent]

@flip
VERY nice,
Do you have the connector type for C1294A/B and C1295A/B?

This is for a 22 badlands VIN 1FMEE5DH0NLB10665

Were you able to get the StaBar disconnect working like the factory installation?

 

[andersman02]

Were you able to get the StaBar disconnect working like the factory installation?

Nope, didn't even try, used an aux switch and happy I did. Very easy

 

[jsoa]

Nope, didn't even try, used an aux switch and happy I did. Very easy

which switch did you hook up to?

I assume when switch is off the sway bar is connected, what happens if the switch is on and you turn off the bronco? does it connect the sway bar again?

 

[andersman02]

which switch did you hook up to?

I assume when switch is off the sway bar is connected, what happens if the switch is on and you turn off the bronco? does it connect the sway bar again?

1, yes if aux is on disconnect is disconnected. If you turn off disconnect is "connected"

Power to the disconnect means it will disconnect. There isn't a always on aux

 

[RigOMortis]

Nope, didn't even try, used an aux switch and happy I did. Very easy

How did you wire it to your Aux - did you get the above harness (MB3Z-2B325-B) Flip posted and what other connnector(s) or wiring to tie in?

 

[jsoa]

How did you wire it to your Aux - did you get the above harness (MB3Z-2B325-B) Flip posted and what other connnector(s) or wiring to tie in?

FWIW, I didn't use that harness, I followed these instructions from @BLUCYFR https://www.bronco6g.com/forum/thre...nnect-technical-information.5659/post-2255825

 

[RigOMortis]

FWIW, I didn't use that harness, I followed these instructions from @BLUCYFR https://www.bronco6g.com/forum/thre...nnect-technical-information.5659/post-2255825

Thank you

Sponsored