2025 Full Digital Cluster successfully installed - swapped into 2022 Wildtrak

[Qasimateen]

the link to the form is right on the product page for the gauges, in the description

Found it. Filling it out. Thank you.

Question, i see Engine Drive Hours and Engine Idle Hours in the form, but i am not able to find that in my cluster. Is this needed?

Sponsored

 

[TacosTuesday]

Found it. Filling it out. Thank you.

Question, i see Engine Drive Hours and Engine Idle Hours in the form, but i am not able to find that in my cluster. Is this needed?

'i left those blank, even in forscan, i couldnt find those numbers!

 

[5GENIDN]

Found it. Filling it out. Thank you.

Question, i see Engine Drive Hours and Engine Idle Hours in the form, but i am not able to find that in my cluster. Is this needed?

Information that is typical of heavier equipment... Tractors and large trucks etc.

 

[smonroe11]

For anybody that wants to see what a 7MT looks like, this is just me going through the gears in my 23' Badlands. Just completed the install today.

Hey thanks for posting the video. I’ve been through all 35 pages and can’t find a definitive answer on part numbers for the cluster and bezel. I have a 2023 Badlands 7MT Lux. Also what VIN did you use. I know it’s been several months since you did the install but any help you or others can give would be greatly appreciated.

-Thanks

Steve

 

[Ducati1098]

Hey thanks for posting the video. I’ve been through all 35 pages and can’t find a definitive answer on part numbers for the cluster and bezel. I have a 2023 Badlands 7MT Lux. Also what VIN did you use. I know it’s been several months since you did the install but any help you or others can give would be greatly appreciated.

-Thanks

Steve

Both part numbers are in the thread, multiple times.

Cluster is S2DZ-10849-D
Bezel is N2DZ-78044D70-AA

 

[gtabert]

Hey thanks for posting the video. I’ve been through all 35 pages and can’t find a definitive answer on part numbers for the cluster and bezel. I have a 2023 Badlands 7MT Lux. Also what VIN did you use. I know it’s been several months since you did the install but any help you or others can give would be greatly appreciated.

-Thanks

Steve

You may want to check out this install video. Easy install, no need to mess with the air bag. Also when I removed the screws I stuck them into a piece of cardboard and labeled where they go. 2.5 hours total. Before reassembly I hit the start button, will need to plug it in (no need to start the bronco) to be sure everything worked. I used Forscan in my install.

 

[adamruiz2001]

You may want to check out this install video. Easy install, no need to mess with the air bag. Also when I removed the screws I stuck them into a piece of cardboard and labeled where they go. 2.5 hours total. Before reassembly I hit the start button, will need to plug it in (no need to start the bronco) to be sure everything worked. I used Forscan in my install.

Do you have the info on everything you had to do in Forscan?

 

[OF Hero]

Do we think this kind of mod would kill resale/trade in value because they might accuse you of odometer fraud?

 

[gtabert]

Do you have the info on everything you had to do in Forscan?

I do, pm me and I'll forward you the cheat sheet I made up. Prior to this I had never used Forscsn, a bit of research and messing around before I did this and it went smooth.

 

[gtabert]

Do we think this kind of mod would kill resale/trade in value because they might accuse you of odometer fraud?

I'm not worried, most may not even know it. I just had mine in for recall work and the dealer did not comment.

 

[BlueBronco]

Do we think this kind of mod would kill resale/trade in value because they might accuse you of odometer fraud?

1. I am willing to bet that most people (including dealer techs) won't even realize a swap has taken place
2. It was mentioned in this thread that you aren't able to program the new cluster with less miles than are currently on the vehicle, only allows input for more miles

 

[gtabert]

1. I am willing to bet that most people (including dealer techs) won't even realize a swap has taken place
2. It was mentioned in this thread that you aren't able to program the new cluster with less miles than are currently on the vehicle, only allows input for more miles

I'm thinking in some other location inaccessible to non Ford Service tech, there is file with the vehicle mileage. I see no reason to cheat, not my game, besides I have an extended warranty good thriugh 150,000 miles. Ducatti probably knows.

 

[Ducati1098]

1. I am willing to bet that most people (including dealer techs) won't even realize a swap has taken place
2. It was mentioned in this thread that you aren't able to program the new cluster with less miles than are currently on the vehicle, only allows input for more miles

You can install/program one with less miles.

After installing it and programming things, when adjusting the mileage, you just can’t go down. But that doesn’t stop someone from installing a lower mileage cluster and not adjusting it. Installing one and programming it alone won’t correct the mileage. That needs to be done after the fact.

But regardless there’s ways to figure out this type of fraud, if it hasn’t been adjusted correctly.

 

[gtabert]

You can install/program one with less miles.

After installing it and programming things, when adjusting the mileage, you just can’t go down. But that doesn’t stop someone from installing a lower mileage cluster and not adjusting it. Installing one and programming it alone won’t correct the mileage. That needs to be done after the fact.

But regardless there’s ways to figure out this type of fraud, if it hasn’t been adjusted correctly.

Yes, I forgot that, but not a smart thing to do, just not worth the perceived gain.

Is the milage hidden elsewhere in the ECM?

 

[Ducati1098]

Yes, I forgot that, but not a smart thing to do, just not worth the perceived gain.

Is the milage hidden elsewhere in the ECM?

I’m sure it is. Not something I’ve ever really looked for to be honest

Sponsored