2025 Full Digital Cluster successfully installed - swapped into 2022 Wildtrak

[SierraBronco]

I don’t regret a lot in life, but not screen-shotting all that is near the top.

laughing out loud. Guess we’ll just have to resort to screenshots of @Kristian@74W talking about counterfeit loctite and dodging questions. Over halfway through the week and he hasn’t come back with a single answer for us.

Sponsored

 

[pillar406]

I must have missed all that debacle with all the crop going on in my life

 

[SierraBronco]

I must have missed all that debacle with all the crop going on in my life

Harvesting is a busy time for us all

 

[theJuice]

I went through 23 pages but never saw discussion about a raptor take off part. Has anyone tried buying a used raptor cluster? Would this work with minimal software changes?? Here's one for sale right now

 

[PowerBronco]

I went through 23 pages but never saw discussion about a raptor take off part. Has anyone tried buying a used raptor cluster? Would this work with minimal software changes?? Here's one for sale right now

https://bronco6g.com/forum/threads/...play-full-digital-dash-conversion-kit
.84814/

 

[coadr]

I went through 23 pages but never saw discussion about a raptor take off part. Has anyone tried buying a used raptor cluster? Would this work with minimal software changes?? Here's one for sale right now

Yeah you’ve been able to use the Raptor one for over a year at this point, the programming is just significantly more complex

 

[redone17]

Has anyone performed this swap on a 7MT?

 

[gtabert]

Panda currently offers the Raptor cluster already set up, the problem in my mind is it has all the Raptor graphics, no way around that.

I emailed Chris at Panda, they do plan on offering the '25 cluster for earlier Bronco's at some point in the future.

 

[coadr]

Just to confirm, N2DZ-10849-D isn't the same as S2DZ-10849-D right?

 

[HalfmuleFarmer]

After having the new cluster for a little while, I finally had time to try and make this swap work.

I haven't had a lot of time to go through everything or look in forscan to see what else I may be able to change/adjust on it, but overall I'm thrilled with the results.
This cluster (IMO) looks a million times better.
Everything is functioning as it should. All the goat modes work flawlessly.
Honestly the worst part of the whole cluster is that it shows a moar door for its goat mode transition images Hoping there's a way to change that, but considering I used a Stroppe VIN for programming, I'm guessing there isn't (Thanks Ford)

Retail price for this cluster doesn't seem to be listed yet. I get parts at cost, so I don't know how much it will be for everyone else.

Ha! Agreed re: the default Bronco image! Why do I have a lame-looking blue 4 door on all the digital cluster elements?!

 

[rugedraw]

Just to confirm, N2DZ-10849-D isn't the same as S2DZ-10849-D right?

N would mean 2022 and S is 2025.

 

[Ducati1098]

Just to confirm, N2DZ-10849-D isn't the same as S2DZ-10849-D right?

N2DZ-10849-D is a raptor cluster
S2DZ is a 25+ regular bronco cluster

 

[coadr]

Thanks guys! I'm back on the grind trying to get ahold of one

 

[coadr]

And success! 2022 is all digital now. Had to put the original bezel back in since that’s taking two more weeks to come but honestly easier than I thought it would be

 

[Ducati1098]

And success! 2022 is all digital now. Had to put the original bezel back in since that’s taking two more weeks to come but honestly easier than I thought it would be

Looks so much better

Sponsored