What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[mpeugeot]

Added a cargo shelf.

Where did you get it?

Sponsored

 

[NORCALGXP]

I know this area your off the Geiger Grade.

 

[loganelcid]

Where did you get it?

https://www.wfoconcepts.com/i-30506052-2021-ford-bronco-4-door-rear-cargo-basket.html

 

[Grandpa]

Finished Plasti Dipping my bead lock rings and installed the Air Design door molding set

 

[raptorusmaximus]

With deliveries just around the corner, let's kick this off. Anything pretty much goes from major mods, regular maintenance, a good wash and wax or coated it mud off roading.

wanted to canvas rear window so when it rains I don't have to put my rear shell back on. I bought one of these from softtopper, its for a F-150 but it works.
It would be great if someone made one specifically for the bronco. ( that's the ford tonneau cover )

 

[UniBroncorn]

Had a North Shore Rack installed. They are made in Canada with North American steel and are less than 900 CAD $. No plastic and bomb proof off-road. 50 lbs and can carry 200 lbs total.

 

[UniBroncorn]

Added some molle panels and mounted some tools and stuff.

I have same axe but in black. Trench Hawk for the win!

 

[BadsquatchNV]

I know this area your off the Geiger Grade.

Yup. Toll Road (below Geiger Grade) then over to Lousetown Road (to the Lagomarsino Petroglyphs) and back.

 

[Lej512]

Latest mod is the Black Diamond hood overlay from StickerFab. I was tempted to do it myself but I ended up having the body shop at my dealership do the deed. I graduated with the body shop manager so I knew it would be done right the first time. $69 for the vinyl and $100 at the body shop. It adds a little "me" to the vehicle.

 

[Base]

We're approaching 100 degrees this week in AZ so I had to get out of the heat, and do some fly fishing in the high country yesterday.

 

[BroncoRebelRunner]

This was a little while back, but I’ve been meaning to post this.

After Christmas, I installed a set of the Mabbett pods. Those pods come with some extra hardware that is meant for use on 2 door Broncos. I realized that the upper bracket was almost exactly the shape I needed for a ditch light bracket. And the holes looked to be the perfect spacing to use both factory screws. Turned out to be off by maybe 1/4in, but I was able to easily slot that hole and file it smooth. I also had to cut a little birdsmouth on one side to give clearance for the antenna. Files it all smoot, cleaned with ipa, and painted generously with some Krylon rattle can paint. I’m pretty certain these are just mild steel, so rust will be a struggle. But time will tell. For the cost of some spray paint I was able to create a super sturdy mount for my cheap ditch lights. There is an inner and an outer hole position for mounting the lights. I’m currently using the outer.

 

[BD6G]

Nothing to major but finally put my TLP together and my Ford Accessories Bimini cover from coverking finally came in. Unfortunately rain is in the forecast for a long while so it’ll be some days before I can get the Velcro laid and sit overnight then install the Bimini. I do have some more parts arriving from mountains 2 metal to install tomorrow.

 

[AXMRDR]

Got some 'gold' letters and an emblem to match the 'gold' rims.

 

[604Bronco]

This was a little while back, but I’ve been meaning to post this.

After Christmas, I installed a set of the Mabbett pods. Those pods come with some extra hardware that is meant for use on 2 door Broncos. I realized that the upper bracket was almost exactly the shape I needed for a ditch light bracket. And the holes looked to be the perfect spacing to use both factory screws. Turned out to be off by maybe 1/4in, but I was able to easily slot that hole and file it smooth. I also had to cut a little birdsmouth on one side to give clearance for the antenna. Files it all smoot, cleaned with ipa, and painted generously with some Krylon rattle can paint. I’m pretty certain these are just mild steel, so rust will be a struggle. But time will tell. For the cost of some spray paint I was able to create a super sturdy mount for my cheap ditch lights. There is an inner and an outer hole position for mounting the lights. I’m currently using the outer.

I like those ditch lights. Seems like everything on the market right now is all the same - Square or round. I like that these are a bit of a combination of both. How's the light output at night?

 

[Callelk]

Installed the Havoc Molle tailgate panel with pouches that I had for my E-Collars, collar charging cables, tire repair kit, soft shackles, and survival kit.

Sponsored