PSI tire pressure on 35's?

[JvKintheUSA]

I got the 35 inch factory tires and the recommended PSI is 39, which seems high (maybe to save gas?). I never had 35s, but the 33s on my Jeep, I ran at 34 PSI. What PSI do y'all run on your 35s?

Sponsored

 

[jsoa]

my 35s came from the factory at 42 psi according to the sensors, I have yet to adjust them... sounds like I should

 

[Baja Bronco]

I run 34 / 35 psi in my 37s. 39 seems high, but tire psi is so subjective. Try some different pressures until you’re happy with the results. Whatever works!

 

[Glade Runner]

my 35s came from the factory at 42 psi according to the sensors, I have yet to adjust them... sounds like I should

Mine came from the factory at 46psi. I lowered them to 39, but haven’t changed them from there yet to compare.

 

[swamp2]

Do a chalk test. Someone posted one here for their Raptor that 35 psi looked solid, saved me 10 minutes...

 

[BumbleBee]

I'm running my 35 at 38 psi, feel perfect and hot they go up to 40-41, so seems correct.
Tried at 35psi, feels nice and soft, but corners a bit too much.

 

[Fordified1]

I’m running 35 psi. 35x12.5 tire on a 9” rim Haven’t done a chalk test yet.

 

[Bugkillah]

I run 39 psi cold on 35” Sasquatch tires, they warm up to 41 or 42. Feels good to me for the streets.

 

[604Bronco]

I’m running my 35x12.5 on the OEM Sasquatch wheels at 40 PSI. I believe the tire says 50 PSI is where they “should” be at.

 

[AndGerry]

Door sticker on my 23 WT has 39 psi cold, but I thought it rode hard whenever it got warm at 43 psi… I’m trying it at 35 psi and I think I like the ride better.

 

[JvKintheUSA]

Door sticker on my 23 WT has 39 psi cold, but I thought it rode hard whenever it got warm at 43 psi… I’m trying it at 35 psi and I think I like the ride better.

Yeah, that's what I'm going to try

 

[mjcutri]

I run 34-36 psi cold. Rides great!

 

[Onestepmore]

I got the 35 inch factory tires and the recommended PSI is 39, which seems high (maybe to save gas?). I never had 35s, but the 33s on my Jeep, I ran at 34 PSI. What PSI do y'all run on your 35s?

Same as others...I've ran my 35's at 39psi and have 10k on them...they are wearing very nicely, so I'm sticking with the manufacturers specs

 

[Mjasi3]

I’m running my 35x12.5 on the OEM Sasquatch wheels at 40 PSI. I believe the tire says 50 PSI is where they “should” be at.

never inflate to what it says on the tire. that is just the tire manu max

 

[userdude]

I've run everything from 32 to 40 with the GY Territories. The higher the psi, the stiffer the ride on my 2dr BL Sas. 32 was a little to soft, I think 34-35 works best for me unless I'm on a long drive.

Sponsored