OBDII Port not working

[TheKim]

I'm guessing it's a fuse issue, but I've got no power at the port.
I didn't see a fuse specifically for the port in the manual and no mentions of the port not working for others on here.

Y'all know which fuse I should check?
The pins and connectors all look good. The Procal device works via USB on the PC and the Ethernet port on it looks good.

Sponsored

 

[Ducati1098]

 

[CalvinT]

F160 in the Battery Junction Box. You couldn't find it because Ford doesn't call it a ODBII port in their documentation.

 

[Dan-O]

If you bought it used, check that the plug and wires are actually the vehicles plug. Could be an aftermarket pigtail from previous owners aftermarket equipment like a tracker that is totally disconnected from vehicle. I bought a used ‘21 and that’s what I encountered. Found the actual OBD2 port wire plug was tucked up under dash.

 

[Dan-O]

Also just noticed profile pic shows Bronco Sport so not sure if fuse locations are same, or if OP is talking about Bronco or Sport??

 

[TheKim]

Also just noticed profile pic shows Bronco Sport so not sure if fuse locations are same, or if OP is talking about Bronco or Sport??

It's a full size, the Sport in the profile pic is because I'm annoying on the forums and do random crap.
I'm in a Bronco from 2021. Port is good, I'll check the fuse later today.

Thanks @Ducati1098 and others

 

[TheKim]

Thank you sir

Sponsored