Fire Extinguisher Mounted Pics - Post Em!

[Ground_zero298]

Lmao. Just put mine in today and the first aid kit. Found a nice quick release on Amazon for it. Seems a little under priced for the quality of it. 2 pilot holes and a pair of self tappers, done.
https://www.amazon.com/gp/aw/d/B07PCM6TM2?psc=1&ref=ppx_pop_mob_b_asin_title
Now I just have to paint my chainsaw red and figure out where to mount that.

Sponsored

 

[Last Ride Bronco]

Lmao. Just put mine in today and the first aid kit. Found a nice quick release on Amazon for it. Seems a little under priced for the quality of it. 2 pilot holes and a pair of self tappers, done.
https://www.amazon.com/gp/aw/d/B07PCM6TM2?psc=1&ref=ppx_pop_mob_b_asin_title
Now I just have to paint my chainsaw red and figure out where to mount that.

Nice!

 

[Tricky Dick]

Lmao. Just put mine in today and the first aid kit. Found a nice quick release on Amazon for it. Seems a little under priced for the quality of it. 2 pilot holes and a pair of self tappers, done.
https://www.amazon.com/gp/aw/d/B07PCM6TM2?psc=1&ref=ppx_pop_mob_b_asin_title
Now I just have to paint my chainsaw red and figure out where to mount that.

Hmm I just ordered the same one under a different brand name. That location doesn't seem too bad if you use the quick release. Except I still have a seatbelt there...

 

[Pacific Ryder]

I have this set up in both my Bronco and Raptor. Work great and easy to get to.

 

[Last Ride Bronco]

I have this set up in both my Bronco and Raptor. Work great and easy to get to.

Is that held magnetically on the passenger side?

 

[roofone2]

+ 1 for the mOaR dOoR, eh @Tricky Dick?

I’m curious if anyones bolted anything to the rear roll bar, where those two exposed holes are. Seems like a logical spot.

Found this. Custom bracket though: https://www.bronco6g.com/forum/thre...-your-bronco-today-👨🏻‍🔧🧰🚿🛠.18089/post-1371305

 

[Bschurr]

Element fire extinguisher secured by 2 magnetic mounts on the rollbar and @604Bronco a pair of Quick Fists screwed to the rollbar woth M8 bolts to secure a small shovel…

 

[Mdemieville]

+ 1 for the mOaR dOoR, eh @Tricky Dick?

I’m curious if anyones bolted anything to the rear roll bar, where those two exposed holes are. Seems like a logical spot.

I plan on mounting fire extinguishers on both sides in those mounting holes. Just gotta get the extinguishers.

 

[TheShark]

 

[Pacific Ryder]

Is that held magnetically on the passenger side?

The seat rail mount just affixes via allen screws to your exiting seat rail. The extinguisher is held in with dual clips. You can see it better here:
https://elementfire.com/products/seat-rail-mount

 

[604Bronco]

The seat rail mount just affixes via allen screws to your exiting seat rail. The extinguisher is held in with dual clips. You can see it better here:
https://elementfire.com/products/seat-rail-mount

I feel like two Velcro straps to the manual seat adjuster would serve a similar purpose too.

 

[Inrustwetrust_]

Built right molle panel. Not fully mounted yet but I tested the Velcro extinguisher mount

 

[BroncoKong Jr.]

The seat rail mount just affixes via allen screws to your exiting seat rail. The extinguisher is held in with dual clips. You can see it better here:
https://elementfire.com/products/seat-rail-mount

I've been having some trouble with that mount. The seat doesn't slide over it like it should. If that's not an option, then it's kinda worthless to me. For now the Element is in the glove box.

Maybe I'm doing it wrong. Do you have a pic of how your bracket is mounted?

 

[jasonkosi]

Mounted mine on roll bar, 2 door

 

[Last Ride Bronco]

Mounted mine on roll bar, 2 door

Never seen that. Where did you get that?

Sponsored