Body Control Module Fuse Box Location?

[CO-Bronco]

Success, dash cam and radars here we come!!!

Sponsored

 

[CO-Bronco]

Are the all "Micro" type fuses or Minis? Can't tell.

 

[Mattbar1]

Are the all "Micro" type fuses or Minis? Can't tell.

I can not say if they are micro or mini but some of them are two in one...the wider ones.

 

[Mattbar1]

My initial testing shows that the Spares that are titled "Not used (spare)" have continuous power from the battery....

Except 35, 17, 18 - These 3 are powered when the Ignition is ON.

You saw it here first!

I plan to use Fuse 4 for Battery Power. Fuse 35 for Ignition ON power.

 

[CO-Bronco]

My initial testing shows that the Spares that are titled "Not used (spare)" have continuous power from the battery....

Except 35, 17, 18 - These 3 are powered when the Ignition is ON.

You saw it here first!

I plan to use Fuse 4 for Battery Power. Fuse 35 for Ignition ON power.

Oh heck yeah, you da man.

 

[Mattbar1]

Are the all "Micro" type fuses or Minis? Can't tell.

They all appear to be Micro 2's and Micro 3's.

 

[swooshdave]

Is the fuse panel crisis over? No bad for a Tuesday.

 

[AK SNO RIDER]

Look at that. Mystery solved. Good job guys. I can rest easy knowing I won't have to spend 10 minutes looking for it when my Bronco shows up in 3 months

 

[Mattbar1]

My initial testing shows that the Spares that are titled "Not used (spare)" have continuous power from the battery....

Except 35, 17, 18 - These 3 are powered when the Ignition is ON.

You saw it here first!

I plan to use Fuse 4 for Battery Power. Fuse 35 for Ignition ON power.

Just wanted to report back that Fuse 4 for Battery Power. Fuse 35 for Ignition ON power worked well for the BlackVue Dash camera I am using.

 

[Jb7]

ordered a mirror power wire tap
For my radar detector, anybody know which of these wires is power and which is ground (the wire tap has small flat metal blades that slide in these holes to tap the power source without any soldering etc…..

 

[Vito]

ordered a mirror power wire tap
For my radar detector, anybody know which of these wires is power and which is ground (the wire tap has small flat metal blades that slide in these holes to tap the power source without any soldering etc…..

Hey Jeff, did you ever figure this out? I'm working with a Valentine Radar Detector and need to hardwire it and wondering where and how I want to hook it up. Thanks!

 

[Kdk12]

Success, dash cam and radars here we come!!!

Please , somebody explain HOW to get here!!! I cannot for the life of me figure this out!!!

 

[LSOR]

How did you pop that panel off? Just pull? I think I popped a fuse for the license plate light and am hoping it’s in there.

 

[Mattbar1]

How did you pop that panel off? Just pull? I think I popped a fuse for the license plate light and am hoping it’s in there.

Yes pull it down from the top. It is hinged at the bottom.

 

[LSOR]

Yes pull it down from the top. It is hinged at the bottom.

Awesome, thank you! I tried pulling from the bottom last night with no luck lol.

Sponsored