aux switches

Spent a better part of today installing HF's RS Edge 4. Not a terribly difficult install, but that's because I've done a ton of research and pre-planning. It was my first electrical install and I must say, I'm happy with the results. These Edge 4s are BLINDINGLY bright on high beam! I plan on...

Im looking at getting a 20 inch rough country dual row lightbar with DRL'S to mount on my bumper using the factory aux switches. Im planning on hooking it up to 2 seperate switches so i can run the DRL's separately.The amp draw on the one im looking at is over 16 amps total but if I look at the...

Howdy everyone, Apologies in advance as I know this topic has been covered several times but am hoping to get some more consolidated answers. I recently purchased the ford performance winch and have it mostly installed (with capable bumper nonetheless courtesy of this thread). I was looking at...

New in box. Never installed/used. Switch panel was removed from the box but never connected or powered up. Just tested fitment but didn’t like how it interfered with the manual transmission shifter. Retail: $249 Asking: $150 Shipping available for $15 - - How it looks mounted:

I’m taking the time to do things on my 2025 the way I wished I’d done them the first time on my 2021. I’ve learned a lot from others on here or otherwise but electrical has never been my strong suit. I’ve made some strides the past couple of years. So, this is one I’m excited to tackle. I’d...

Hey Bronco Nation. Its been a while since I dropped the original Auxiliary Retrofit DIY - How To write-up, almost four years ago. Since that time, there's been a lot of solutions that have hit the aftermarket. A few of you have asked for some help, or brought up some great alternatives and I...

A question for anyone who has installed the Hanspilot AUX switches. I recently did the install and the directions at the end get very vague. Question #1 do I need to use the ILL wire to the interior fuse box? (Is it optional). Question #2 do I need to wire it into the OME wires under the hood...

HELLO OFF ROADERS, thanks in advance for your help answering my newbie wiring question Correct me if I’m wrong, my understanding is that the ford bronco aux switch wiring includes the fuse and relay in the power distribution box. So my question is, in order to wire AUXBEAM ditch lights , can I...

sorry for the total noob question, but my bronco is in the shop and I ordered a bunch of aftermarket lights for it, but I have no idea what my options are with the aux switches. Here is what I bought: oracle backlight bronco letters (orange) Oracle halo headlights colorshift Baja designs fog...

My Bronco came to me without the upfitter switches. I didn’t love any of the after-market pods so I designed something that uses the screws on the inside of the grab handle. This also gives you easy access underneath the dash close to the grommet that goes through the firewall. Made installing a...

Hey there Bronco6g, Finally diving into my first lighting project, and I'm a little nervous! I have come up with a plan, but would love some advice from the lovely folks here before I cut apart the wiring harness that came with my lights and / or set my vehicle on fire. I figured it wouldn't...

Where is the power distribution that I can connect things to? I'm an amateur radio guy and would like to be able to control power to various rigs. I have no idea where? I checked the big fuse block under the hood...lots of empty positions...is there a key to them somewhere? Or are they just...

So I have a 2022 OBX without AUX switches. I want to fit AUX switches that look as close to OEM as possible. I have seen the middleton OEM upfitter kit which is sadly way too expensive for me. I have seen an alternative like this. But I am curious would this work? I know a workshop that can cut...

Has anyone used the aux switches to run more power to the truck of your Bronco? How did you go about it? I tailgate football games frequently and would love to be able to run a TV and potentially a blackstone electric grill from it!

I know for most people this is not worth the effort but I wanted a low risk starter project to get more comfortable with wiring electronics in my Bronco. Cost: about $50 including purchase of soldering iron and multimeter Time: about three hours all in, would be much faster for someone with an...

[RESOLVED] *Bad pod light relay popped 10A fuse in the main fuse box. I guess the Aux switch fuses are labeled as "up fitter switch #" so I didn't see them at first. Background: I recently installed fog and pod lights on my rig. They worked perfectly for about 2 months then one pair suddenly...

Hi All, I took my Big Bend to my local dealership today to have them install the Aux switches. They previously ordered the parts they said it would require for the install. Within two hours they called me to let me know the Bronco doesn’t have the wiring harness in the A-pillar. I thought that...

Got around to installing my RC 2 inch cube lights for the rear bumper. This was not really straightforward and the rear AUX wire is a major PITA to get to, lol. Purchased off Amazon: -Flood lights for $70 (open box- Rough Country 2" Black Series Square CREE Cube LED Lights | Flood - 70133BL...

I’m looking at buying a set of 3 pod fog lights to go into my bumper, and i want to get a set with the amber DRL option. But i do not have the factory AUX switches, so what are my simplest options for grabbing power for the DRL? Will be adding a switch for the regular fogs but not sure what to...

Hey all just wanted to know has anyone ordered something and it not be included on their rig? Got my window sticker today, email that it was completed, VIN etc...I'm noticing my MIC hardtop and SAS parts were included..however some $250 charge (Not sure what it is); but no Aux switches that I...