NEW | Morimoto XB Tail Lights | Now Available

[daniel.edwards2019]

Do we have any update if these will work with the stock big bend w/o LED's?

Sponsored

 

[jsoa]

Do we have any update if these will work with the stock big bend w/o LED's?

I just installed my 3rd replacement set, will report back when I drive it more, I don't expect them to work for very long on non-leds

 

[Lej512]

Although I didn't go the Morimoto route on my 2023 BD, in less than two years, I've had to replace both LED bulbs and both resistors. I don't have the time or the patience to be tearing the tail light housings out every six months just so I can have LED's to the rear. I'm back to my factory halogens. It is what it is.

 

[cjflexmaster]

Anyone with a halogen bronco have these working? I called Morimoto last week and let them know the replacements are doing the same thing. They sent me 20ohm resistors which in theory should work. I haven't put them in yet. Has anyone put the 20ohm resistors in and have the tail lights working correctly?

 

[evilletruck]

Anyone with a halogen bronco have these working? I called Morimoto last week and let them know the replacements are doing the same thing. They sent me 20ohm resistors which in theory should work. I haven't put them in yet. Has anyone put the 20ohm resistors in and have the tail lights working correctly?

Nope And you get a different response from everyone you talk to there unfortunately.

 

[jsoa]

Anyone with a halogen bronco have these working? I called Morimoto last week and let them know the replacements are doing the same thing. They sent me 20ohm resistors which in theory should work. I haven't put them in yet. Has anyone put the 20ohm resistors in and have the tail lights working correctly?

You will have no luck in this, im working on my 4th warranty claim with them, been through 2 or 3 different resistors and still has the issues. See this thread https://www.bronco6g.com/forum/thre...oto-xb-tail-lights-issues.124587/post-2789561

 

[cjflexmaster]

You will have no luck in this, im working on my 4th warranty claim with them, been through 2 or 3 different resistors and still has the issues. See this thread https://www.bronco6g.com/forum/thre...oto-xb-tail-lights-issues.124587/post-2789561

Thanks, that is what I was afraid of.

Before these tail lights I have been pretty happy with Morimoto products but it sounds like we might be out of luck.

 

[GRNMACHINE]

Was considering ordering these, glad I found this info. They do look very nice, but will consider the Form Lighting now. Havent read any negatives on them. Hope Morimoto can sort this out because they are obviously losing business over this, oddly they are still selling with zero disclaimers or notes.

 

[4x4TruckLEDs.com]

Was considering ordering these, glad I found this info. They do look very nice, but will consider the Form Lighting now. Havent read any negatives on them. Hope Morimoto can sort this out because they are obviously losing business over this, oddly they are still selling with zero disclaimers or notes.

Form Lighting are 15% off from us right now. Use coupon code JULY

https://www.4x4truckleds.com/form-lighting-led-tail-lights-for-2021-ford-bronco/

The Morimoto are also 15% off.

https://www.4x4truckleds.com/morimoto-xb-led-low-profile-tail-lights-for-2021-ford-bronco/

If you don't have halogen tails the Morimoto work great. But if you have halogen tails go with the Form Lighting

Sponsored