Sponsored
CalvinT's latest activity
-
CalvinT replied to the thread Where is the fuse located for the rear cargo area cigarette lighter?.It's a simple circuit. Ground is good, it shares the ground connection with other circuits that are working. So the problem is between... -
CalvinT replied to the thread Wrap install before or after dealership service?.The dealer goes by VIN, not color. Ford makes the final decisions about warrany coverage, not the dealer. Modifications don't affect...
-
CalvinT replied to the thread Thinking about a Bronco.Nice looking '56.
-
Hey don’t forget 2 door station wagons exist… 🤣🤣 But the 2 doors have the looks compared to the 4 drs. Closest resemblance to old gen...
-
CalvinT replied to the thread Where is the fuse located for the rear cargo area cigarette lighter?.There are three fuses involved with the sound system. None are labeled stereo. F31, F32 in the Body Control Module (BCM) and F146, in...
-
CalvinT replied to the thread Where is the fuse located for the rear cargo area cigarette lighter?.It's F33. F32 is the front power outlet. It's in the paper owner's manual. Unfortunately the onboard manual doesn't tell you which fuse.
-
CalvinT reacted to The Green Flash's post in the thread Is it the glass... or the windshield angle? with
Like.
This. I've had my 6g for 2 years & 13,000 miles. I haven't caught a rock to the windshield yet. I've had my 1st gen for 24 years now... -
CalvinT reacted to LeJerk's post in the thread Is it the glass... or the windshield angle? with Like.
Stop driving so close to other cars.
-
CalvinT replied to the thread Thinking about a Bronco.People talk about the 2.3L not having enough power. I have a 4-door Badlands, heaviest of all Broncos other than the Raptor. I can get...
-
CalvinT replied to the thread Manual comes out of gear with no clutch.When I was in high school I drove my Father's 1955 F-100 around town without using the clutch. It would even start in gear. When at...
-
Normal Edit - you can even put it INTO other gears smoothly without using the clutch as well...
-
All of them should do that if you don’t have a lot of torque getting pushed through the drive train when you try it
-
CalvinT replied to the thread First thing you did to your Bronco?.That was the second thing I did. The steps were added at the dealer before leaving the lot. The license plate frame was replaced as soon...
-
Removed the dealer license plate covers. I'm not fond of paying for the privilege of being someone else's billboard
-
CalvinT replied to the thread First thing you did to your Bronco?.My dealer includes a full tank of gas with every car they sell, even used cars.
-
CalvinT replied to the thread No power to my upfitter switches.Check F2 (10A) in the Body Control Module (BCM). For 2022 and 2023 it provides power to the overhead switches. That's how they're able...
-
CalvinT reacted to DeathValleyBob's post in the thread Need advice on antenna and power routing. with Like.
Oh yeah, forgot to mention: be sure to get a ground plane-less antenna and use low loss coax. Ground plane metal is sparse in the back...
-
CalvinT replied to the thread trailer power?.Voltage drop depends on current draw and wire size. What size wire is used in that circuit? I don't know. If someone is planning on a...
-
CalvinT replied to the thread Are we sleepwalking into World War III? [ADMIN WARNING: NO POLITICS].You never know what companies make beside their core product. Insinkerator was the first producer of black boxes for airliners. Years...
-
CalvinT replied to the thread Spectrum has blocked forscan IP address and now I can't resubscribe to forscan anyone else having that problem.Spectrum is probably blocking Forscan's domain in their DNS server since Forscan is in Russia. You could try changing DNS servers. It...
-
CalvinT replied to the thread trailer power?.According to this, it's on a 30 Amp fuse. I'm not sure when the Trailer Tow Park relay is energized.
-
CalvinT reacted to cynicalrider's post in the thread Bronco Owners, Let’s Talk TrailDeck Slide Out Tailgate Drawer & Tailgate Tables! with Like.
IMO the handle isn't even needed. I always pull by the lip my hands are already at when I release both latches.
-
its coursemotorsports head. i took it out from my previous vehicle. and jbwelded with amazon mount.
-
CalvinT replied to the thread Bronco Owners, Let’s Talk TrailDeck Slide Out Tailgate Drawer & Tailgate Tables!.I've looked at a couple of these in person. The biggest problem is the handle. It sticks out too far. Why I have no idea, it doesn't...
-
CalvinT replied to the thread ESP PremiumCare or Not?.I thought it was from the date the vehicle was delivered. So for me it would be April 2023. I get mixed information from Granger...
-
CalvinT replied to the thread Bronco Owners, Let’s Talk TrailDeck Slide Out Tailgate Drawer & Tailgate Tables!.Poor planning? Their test mule didn't have a tailgate table.
-
CalvinT replied to the thread Phone Mount Recommendations.Whose Magsafe charger did you use? It's the first one I've seen that has a USB C connector instead of a cable.
-
I normally used coursemotorsports mounts for my cars - They are chargeable and hold strong(use them in my track miata and no issue)...
-
CalvinT replied to the thread Keep It Like New.I tried synthetic clay on my Subaru, wasn't happy. I can't remember why as that was about four years ago. But then many people seem to...
-
CalvinT replied to the thread Swiss Alps Badlands: A Bronco across the ocean.I think it's interesting that you ordered in 2025 yet recieved a Bronco made in October 2023. Makes me wonder where it was all that time. -
CalvinT replied to the thread Keep It Like New.I did a Google search for "auto detailing supplies Phoenix" and got a number of hits. One supplies the company that did my ceramic coat...
-
CalvinT replied to the thread Broaddict trail deck installed.Just never use upholstery foam. It emitts corrosive gasses. I learned about these people a few weeks ago. I think I'm going to give...
-
CalvinT replied to the thread Father's Day 10% Off SALE.Sometimes we seem to get posts about sales on the last day of the sale, or the day after it ended.
-
CalvinT replied to the thread Father's Day 10% Off SALE.I'm confused. The post says Father's Day, but the dates on the poster are for the week before Father's Day.
-
CalvinT reacted to GA2Dr's post in the thread DV8 Storage Compartment reviews / experiences? with Like.
My DV8 box is basically sitting on the muffler. Box does not get hot. As I posted earlier I put a layer of gold heat tape on the bottom...
-
CalvinT replied to the thread DV8 Storage Compartment reviews / experiences?.I'd like to know how warm the inside of the compartment gets with the factory muffler, 2.3L engine. Also how well is the thermal shield...
-
CalvinT replied to the thread Keep It Like New.I bought the regular Ford flaps. They match the contour of the flares better and they're cheap. Haven't installed them yet.
-
CalvinT replied to the thread thoughts on removing armor on front corners / rear: put on at dealer 3 years ago -.They shouldn't be that difficult to remove if someone is patient and uses a heat gun on low. You'll need Goo Gone and some isopropyl...
-
CalvinT replied to the thread Using factory pre-run wires for always-hot accessory power (bypassing upfitter switches)?.Look through the threads for retrofitting the factory upfitter switches. Someone talks about doing the modification. I think there are...
-
CalvinT replied to the thread thoughts on removing armor on front corners / rear: put on at dealer 3 years ago -.My Badlands is Cactus Grey. A few weeks after delivery, I removed the covers above the windshield so I could install a roof rack. That...
-
CalvinT replied to the thread Keep It Like New.Water spray. Fill a spray bottle with water and a few drops of dish detergent It makes it easier to apply the protecters and get rid of...
-
CalvinT replied to the thread Keep It Like New.Make sure you use a spray when applying them. The adhesive is VERY good and you won't get a second chance. Spray first, a roller to get...
-
CalvinT replied to the thread Using factory pre-run wires for always-hot accessory power (bypassing upfitter switches)?.Not true. You need to modify the wiring harness. Some have modified it so that some upfitter switches are always hot and some not.
-
CalvinT replied to the thread Keep It Like New.I agree about sill protectors. Most don't really protect, they don't cover the edge of the step where wear is most likely. I bought...
-
-
CalvinT replied to the thread Keep It Like New.I bought Bartact paracord. I needed handles and couldn't find any metal ones I liked. Also paracord won't interfere with the side...
-
CalvinT replied to the thread Keep It Like New.Steps and grab handles for most people. Nothing else much matters if you can't get in it.
-
CalvinT reacted to Brian_B's post in the thread Using factory pre-run wires for always-hot accessory power (bypassing upfitter switches)? with Like.
Sure, they would work fine for a starlink. They are just pre-run wire, there's absolutely nothing special about them. They don't have...
-
Check in the space behind the drop down panel under the steering wheel. Mine was there.
-
CalvinT replied to the thread Fender flare repair.3M sells adhesives designed for gluing the plastics used in automobiles. But they're expensive, $55 on Amazon, and require a dispensing...
-
CalvinT replied to the thread Swiss Alps Badlands: A Bronco across the ocean.Today I learned that TPMS Sensors have to be activated when they're installed. Normally the factory does that. The OP has Method...
