Which is best way to improve stance?

[Hydro556]

I have a 25 OBX with lux and sasquatch. Factory 35s.

I dont love the stance due to how tucked in the tires are.

Curious what others think the best option to improve this is.

I considered narrower flares, wider tires or switching to 0 offset wheels. Or some combo of these. Don't really want to run spacers.

Just want a little tire poke, without risking too much road debris damage to paint.

Curious what others have done and the look of the end result.

Sponsored

 

[PWillette]

I have a 25 OBX with lux and sasquatch. Factory 35s.

I dont love the stance due to how tucked in the tires are.

Curious what others think the best option to improve this is.

I considered narrower flares, wider tires or switching to 0 offset wheels. Or some combo of these. Don't really want to run spacers.

Just want a little tire poke, without risking too much road debris damage to paint.

Curious what others have done and the look of the end result.

0 offset was too much for me for more poke...I went w/ a +12 offset and run the non-squatch flares in the summer months.

 

[orion]

Narrower flares or no flares. You'll be messing with your scrub radius if going the wheel method and that is detrimental to your steering components.

 

[Brian_B]

Narrower flares or no flares. You'll be messing with your scrub radius if going the wheel method and that is detrimental to your steering components.

Agree - Flares are the easiest and most benign way to play with poke.

 

[5GENIDN]

I went with 4 inch wheel spacers...LOL

I do not think it has too much poke....

 

[Hydro556]

0 offset was too much for me for more poke...I went w/ a +12 offset and run the non-squatch flares in the summer months.

Any pics?

 

[JL8jeff]

Go with a 0 to +12 offset wheel with a different brand tire. You'll save weight with the aftermarket wheels and you can sell your stock Sas wheels/tires to offset some of the cost. But then you'll want to go to 37's and that's when the fun starts.

 

[not on the rug]

Swap out the Squatch flares for a set of Standard flares. They're 2" narrower and will give you exactly the effect you're looking for.

 

[PWillette]

Any pics?

Apparently I don't have any pics w/ the narrow flares. This is w/ the squatch flares, 37 x 11.50s on +12 wheels which is virtually the same poke as OEM squatch within a couple mm. Tread is pretty much even with the flare, sidewall slightly poked. I'd recommend running the squatch flares in the winter.

 

[Hydro556]

Apparently I don't have any pics w/ the narrow flares. This is w/ the squatch flares, 37 x 11.50s on +12 wheels which is virtually the same poke as OEM squatch within a couple mm. Tread is pretty much even with the flare, sidewall slightly poked. I'd recommend running the squatch flares in the winter.

Looks great thanks

 

[userdude]

Would love to see a Three Stooges build.

 

[Snacktime]

Mickey Thompson has new super stance tires!

https://www.mickeythompsontires.com/light-truck-tires/baja-belted-ii

 

[Wyld2dr]

3" factory flares for non-sas broncos. $200 and solves everything.

 

[userdude]

Mickey Thompson has new super stance tires!

https://www.mickeythompsontires.com/light-truck-tires/baja-belted-ii

Are those fur realz?

 

[Snacktime]

Are those fur realz?

Ohh they are! I really want them for snow wheeling!

Sponsored