Long Range Fuel Tank 30 gallons ordered [ADMIN WARNING: NO POLITICS]

[zuke]

Real interested in how a steel skid could be adapted or made to affix below to prevent gouging in the aluminum from rocks etc.

I'd just get a sheet of 1/2" UHMW and epoxy it right on the bottom of the tank for gouge protection, Assuming that the tank is already strong enough not to dent..

Sponsored

 

[TPadden72]

I'd just get a ...

I'd let the owner/ tester get it out of the box and mounted then wait for his results.

Tom

 

[monsterfd]

realistically. if you cut an aluminum sheet to match. add washers to match where it mounts... it'll probably work. But maybe this will inspire other companies to make their own fuel tanks.
but i was knocking around the tank to see how sturdy it felt, and the bottom definitely is reinforced.

metalcloak makes an exhaust skid, it may fit your tank

 

[rayofsi]

metalcloak makes an exhaust skid, it may fit your tank

I don't think any current fuel tank skids will fit this aftermarket one.

 

[Techun]

Color me impressed that it arrived

 

[Robs94Bronco]

Interested.... @rayofsi Are you going to do some sort of leak/pressure testing? I saw a YT video of this tank being installed by chinese guys with tiny hands.... Let's see how the install goes!

 

[rayofsi]

Interested.... @rayofsi Are you going to do some sort of leak/pressure testing? I saw a YT video of this tank being installed by chinese guys with tiny hands.... Let's see how the install goes!

Lol not sure where leaks would come from. I have some faith in made in China goods. I don't want to introduce any contaminants to this. The bottom plate looks pretty decent on this too

 

[swamp2]

Yeah, I see what they did, just welded on an entire bottom plate to act as an integrated skid plate. Many crawlers probably need a bit extra, critically with some space between the tank and an added skid plate.

Are you going to do some sort of leak/pressure testing?

LOL when this was posted prior in this thread and still LOL now.

Do those welds look ametuer? Does any part of the tank look ametuer? With a potential fuel leak as the consequence, do you really think there is a significant chance this has a leak or wasn't leak tested?

Once you have such a tank sealed up the leak testing is simple (which I'm saying to point out that the manufacturer did this, not to instruct the owner to do it himself...). After sealing, pressurize with air and apply a mist of soapy water via a spray bottle on all welds. Leaks will be quite obvious.

 

[Gluestick]

At this point I’m a big fan. I am real interested.

 

[rayofsi]

will try to get this installed hopefully in the next 2 weeks, between work, and my busted golf R sitting on jackstands in my main garage. Hands are tied. I'm not snoball material, so i'm most likely not pulling this off in my driveway.
just not sure if i'll be able to get to somethings with one side of the car jacked up

 

[Ninjak]

That is a nice-looking piece. Looks really beefy. They have a market over there with Bronco's, so I am sure they are trying to put out good products, and what better marketing than having US-based Bronco's use the product and be happy?

Looking forward to the install.

 

[AZ4x4Adventure]

Would be interesting to see what the weight difference is between the full factory setup (tank/skid) vs this tank.

 

[TPadden72]

Would be interesting to see what the weight difference is between the full factory setup (tank/skid) vs this tank.

Probably much less than the weight difference between driver vs driver and passenger(s), but that's a question I've been too afraid to ask for years.

Tom

 

[rayofsi]

It's light lol, I picked it up myself. Im not sure my tank will be fully empty when I take it off

 

[TPadden72]

It's light lol, I picked it up myself. Im not sure my tank will be fully empty when I take it off

... and low, relatively centered. Probably less than unsprung weight of most wheel/ tire modifications.

Sponsored