"VEVOR" Hard Top Remover Lift

[J-Lugster]

https://www.amazon.ca/VEVOR-One-Person-Operation-Compatible-Wranglers/dp/B0F5WL4NMH

I know there are a few hardtop lift style carts on the market. Has anyone got any feedback or reviews of this model made by Vevor.

It looks almost identifcal to the Toplift Lift N Go and the RollnJack brands but is a lot better priced.

Sponsored

 

[BudgetBronco]

Looks cheesy to me, and the Amazon comments seem to reflect that.

IMO anything under 4 star review is a NO GO

 

[helifino16]

On the other hand, if used carefully, this can act like another set of hands when managing the Hard Top removal. I can recall one YouTube video of a guy struggling to get a 2dr back-half roof off by himself. It certainly made a good case for something like this (even if sketchy).

 

[Mjasi3]

I have the rollnjack (https://a.co/d/8udRrU3) from which this is knocking off. That angle brace means I wouldn't trust it...

we love ours. very beefy. simple one handed operation - just turn the crank.

 

[J-Lugster]

I have the rollnjack (https://a.co/d/8udRrU3) from which this is knocking off. That angle brace means I wouldn't trust it...

we love ours. very beefy. simple one handed operation - just turn the crank.

Did you need to buy the half moon attachments to make it work with the Bronco?

 

[j_marinelli]

EZ4x4 also has an option too
https://www.ez4x4.com/collections/4...ard-top-remover-lift-for-4-door-ford-bronco-s

Also has a 15% off for the holidays too

 

[Cordycord]

As someone who has had dozens of their products copied and released by other companies, I'd hope that customers would appreciate the company that spends the time to do the REAL R&D, not just "Rob & Duplicate." This doesn't even have to do with where it's made, just how it's designed....as an organic idea, or as a jumping-off point for someone else's good idea.

 

[Mjasi3]

Did you need to buy the half moon attachments to make it work with the Bronco?

I did end up purchasing the 1/2 moons, but they were not necessary. I think they give you an inch or 2 more to support the front end more with the 5th arm... but if I had to do it again, I wouldn't. I only use them on the back glass side. I also pull them into the lip of the back window as I'm raising it.

 

[Y2KFirehawk]

Depending on your skill level, one could also be built for far less.
https://www.bronco6g.com/forum/threads/an-easy-solution-to-remove-your-hardtop.96833/#post-2277648

 

[J-Lugster]

Depending on your skill level, one could also be built for far less.
https://www.bronco6g.com/forum/threads/an-easy-solution-to-remove-your-hardtop.96833/#post-2277648

I am more "Hack" than Handy so I'm stuck buying one of these contraptions.

 

[J-Lugster]

OK so if I'm not going to cheap out with the Vevor model that I was asking about, what are people finding is the best option.

The Rollnjack, Toplift LiftNGo and EZ4x4 are all around the same price and very similar.

RollnJack
https://www.amazon.ca/gp/product/B08BP5KDHG/ref=ox_sc_saved_image_1?smid=A1B0FZA5SDVX3&psc=1

Toplift Lift N Go (looks almost identical to the RollnJack & almost same price)
https://www.amazon.ca/gp/product/B0CRG82H6L/ref=ox_sc_saved_title_8?smid=ANWR901PKEQ8B&psc=1

EZ4x4 (folds up for winter which is a plus & about $100 more)
https://www.amazon.ca/gp/product/B0DVMP62LT/ref=ox_sc_saved_image_6?smid=A3R1S58WKHPEWH&psc=1

These last two, Toplift Pro & Venture Pro are both pricier (about $600-700 CAN) and the Venture Pro is foldable which again would be good for storing in the winter.

Toplift Pro
https://topliftpros.com/products/jeep-hardtop-removal-tool

Toplift Venture Pro
https://topliftpros.com/products/venture-pro

 

[drewski]

FB marketplace and buy a used Toplift Pro for $500-600, It will be like new. They the Cadillac. No cranking and cranking and cranking, just 1 push and it's off.

 

[redone17]

TLP is $550 right now for Black Friday

 

[redone17]

That being said, I’m a fan of Vevor products. I’ve used their spring compressor, garage LEDs, pop-up garage, pool cover, flat top griddle, floor scale, among others and they all work great. I just bought their rivet nut tool kit for $40.

 

[EZ4X4]

Thanks for showing interest in our product! If you're interested, we're offering an exclusive discount for our Bronco6G fam - 20% off any number of products with the code 6GBLKFRI. If you have any questions about our product, I'd be happy to answer them

Sponsored