What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[jrandy]

In the Bay Area, dash cam is a must. Finally got around to hardwiring it and putting the rear camera somewhere that works with both the top on and off.

Sponsored

 

[CoryB20]

I feel like an old man for doing it (I am 65 after all), but I installed some 21 Offroad mud flaps. The Black Diamond tires are working on picking up every rock in my gravel road and then throwing them under and up the sides of the Bronco when I start driving on pavement. After the first drive today I noticed a marked decrease in rock pings and clangs after hitting the pavement.

 

[MikeOBronco]

It's finally here! I picked up my 2dr over the weekend after an 18 month wait and dropping from Wildtrack to BL. Installed a few things that I bought during Black Friday sales last Nov. GOAT Fab rails were a quick install, are pretty beefy and they look good on the 2dr.
Painted my NVM shock skids and got them installed. I did the first side with the wheel on and the 2nd side with the wheel off. For me it was way faster to just pull the wheel.
Got my Top Lift PRO assembled and put to work. Watching the 3 part install video series was very helpful. The videos are not specific to the 2dr Bronco lift, but 95% of the content is applicable.
Climbing into the car to fold out the arms on the 2dr version is kind of a pain, but the device works well.

 

[Herbie]

Painted and installed my ADV Fiberglass ram air hood

I love the Alpharex, I just can't bring myself to pull the trigger on the price tag. More to the point, my spouse would kill me. Some day. Looks great.

 

[dgorsett]

Got my new driveshaft. Ask dealer about my low range back up cam issue, said my VIN wasn't listed. A battle for another day.

 

[cynicalrider]

Installed the Course Motorsports phone mount and used their 25MM ball, a RAM mount, and the quad lock 1" ball to make it work with my old quad lock mag safe mount setup.

Untitled by Michael Halat, on Flickr

Untitled by Michael Halat, on Flickr

So far one of the best locations IMO that doesn't require some massive dash rail setup that I don't really need.

 

[Clump]

Yesterday - First wash and wax. It will never be this clean again.

Later installed Mabett mud flaps.

 

[Kfonte]

I love the Alpharex, I just can't bring myself to pull the trigger on the price tag. More to the point, my spouse would kill me. Some day. Looks great.

I feel ya! They are pricey, but the amber Oracle Bronco lettering was screaming amber halos to match. I had to oblige.

 

[cynicalrider]

Painted and installed my ADV Fiberglass ram air hood

What front tube is that?

 

[FDHog]

Installed Dirty Dog 4 Dr pet divider in my 2 Dr. Had to tweak a few things, but fits great. Now the Beast can be confined.

 

[PrepVet]

I installed all my Mabett interior lighting and TRIED to install the rear cupholder but I guess I stripped the hell out of one of the console bolts because it will not go in. Period. And I used hand tools, no battery or air. Maybe I should just try to power through it? lol The console is now moving and creaking until I get that back in. Ugh.

 

[Herbie]

I feel ya! They are pricey, but the amber Oracle Bronco lettering was screaming amber halos to match. I had to oblige.

A slave to fashion

 

[Kfonte]

What front tube is that?

DV8 low profile

 

[Icypu]

I Put in my ss5 (driving pro) and ssc2 (spot pro) Diode dynamics ditch light set. I put two on one side. The light is assymetrical due to my snorkel. I intend to put an external vandal type IP68 latching switch on the outside of the bracket so I can use the backlights as map lights when im doing stuff on my hood. If you have a bracket that screws to both accessory holes note the side towards the hook is 3mm lower than the outside. I put a steel washer between the bracket.to level lighrs netter
.

 

[Beach_Bum]

Installed the Course Motorsports phone mount and used their 25MM ball, a RAM mount, and the quad lock 1" ball to make it work with my old quad lock mag safe mount setup.

So far one of the best locations IMO that doesn't require some massive dash rail setup that I don't really need.

I like it. Out of the way and secure. I added the link to the Course Motorsports Mount to your quoted message. Could you take a few more pictures of the back side and side view?

Sponsored