Installed IAG 4PC Interior LED Dome Light Kit with Harness

[GotWake]

Dang, didn't know you had to take the tires off to put this light kit on. Serious install right there

LMAO I’ve got to get those to storage.

Sponsored

 

[lando88]

Can anybody that has installed this on a 2Dr show pics of what it looks like installed??

 

[nomnom]

$15 Amazon boat lights

 

[Strykerwsu]

$15 Amazon boat lights

Did you wire them in the same way so that they come on with doors or simply aux?

 

[nomnom]

Did you wire them in the same way so that they come on with doors or simply aux?

Aux

 

[userdude]

$15 Amazon boat lights

Side effect: Starts calling self "Skipper" and finds boat shoes irresistible. lol

 

[KyTruckPlant]

I am going to go with this wiring setup once my lights get here. Controlled by the dome light instead of AUX or door sensors.

https://www.bronco6g.com/forum/thre...osfet-for-interior-lights.66956/#post-1815198

 

[markpilip]

I installed mine about a week ago. Pretty easy if you follow the instructions.

I ran the connection to Aux 6 through the firewall grommets and it was pretty easy to do.

Only one problem: I tapped the wrong wire--my lights only flash now when the door locks actuate. Although the they work fine via Aux 6.

I must be a little color blind. I have to go back under the dash and re-tap the correct wire once the weather gets a little warmer

 

[David-AK]

Had to remove parts of the roof rack, forward and mid section of the top but it went well. Took almost 3 hours but it’s a great quality kit and made a Hugh differance to the lighting of the interior. Still waiting on the Mabett rear dome light to get here and then that should do it for lighting. Thanks @IAG Performance for offering this great kit.

Have any pics with the lights turned off? Trying to find pics of the lights installed on 4dr hard top; specifically what do they look like with the brackets.

 

[Wildfire1]

Have any pics with the lights turned off? Trying to find pics of the lights installed on 4dr hard top; specifically what do they look like with the brackets.

I’ll get it for you as soon as our storm is over. The Bronco 9s in our shop but getting to the shop 9s the problem lol

 

[Chicoricopico]

With kids and car seats in the back, one of my biggest complaints about the Bronco was the lack of light in the cabin.

I just completed install of the IAG Lights, phenomenal product and super detailed installation instructions. This product delivers big time . In most cases I’d rather pay someone to do these things but am handy enough to handle a DIY project when it calls for it. Is it bright, hell yeah, but that's why i bought them.

A couple of notes/comments. Really great installation instructions with a few exceptions:
- as mentioned by others, accessing the grey/purple wire is WORK! First, there is a grey/brown wire that looks very much like the one you’re looking for if you don’t have enough light or good eyes. I don’t feel like this is emphasized enough. Now you know. Second, it’s a REALLY tight fit. Like getting your hands in there is a challenge. Third, getting the T-Tap around the grey/purple wire with minimal slack is a challenge. Don’t make the mistake I did and turn the T-Tap upside down and let the little metal piece fall out underneath the dashboard. You will never find it. ️ It took a couple days before I could get a duplicate and complete the install. Sucked. Really. This was no fault of IAG, just want you to be aware before you begin the install.

Bottom line is you won’t regret the purchase or deciding to install yourself, it really is an amazing addition to the Bronco interior

 

[TheVileWay]

I installed these lights the other day and for the life of me I can get the module programmed. Would someone kindly explain how you program the module? Appreciate the assist.

Sponsored