Swing Gate Storage Bag Options?

[shane_02112]

I was going to order one of these until I saw it is not compatible with Raptor: https://www.ford.com/product/molle-grate-system-for-swing-gate-p2805100505

Was hoping to get some suggestions on some similar ones that will work with Raptor- Thank you!

Sponsored

 

[swamp2]

And a trash bag one that accommodates the rear camera. Please, someone make this...

 

[Bschurr]

I was going to order one of these until I saw it is not compatible with Raptor: https://www.ford.com/product/molle-grate-system-for-swing-gate-p2805100505

Was hoping to get some suggestions on some similar ones that will work with Raptor- Thank you!

I installed that on my Raptor and it fits fine. In fact, there are many Ford parts that indicate “Not compatible with Raptor” and they fit & work fine including the factory soft top & FP winch kit.

NB - I modified the Molle Tailgate install on both my Badlands & Raptor by utilizing some zip screws across the top seam to provide a better connection to the tailgate and stronger carrying capacity than just the provided clips/straps. I could have used nutserts but the screws work just fine and the resulting holes are covered by the plastic trim is you decide to remove it so there is no visible damage either way.

Buy with confidence.

 

[shane_02112]

Thank you!!

 

[projectbadlands]

I was going to order one of these until I saw it is not compatible with Raptor: https://www.ford.com/product/molle-grate-system-for-swing-gate-p2805100505

Was hoping to get some suggestions on some similar ones that will work with Raptor- Thank you!

I have this and not the biggest fan. The whole panel sags once weight goes on.

 

[DewarT]

NB - I modified the Molle Tailgate install on both my Badlands & Raptor by utilizing some zip screws across the top seam to provide a better connection to the tailgate and stronger carrying capacity than just the provided clips/straps. I could have used nutserts but the screws work just fine and the resulting holes are covered by the plastic trim is you decide to remove it so there is no visible damage either way.

I also have this on my Raptor and plan to do what you note above. It clips on and has some doubles sided tape which was not up to the job. 6 sheetmetal screws or nutserts/bolts should do well.

 

[Ft. Worth Rob]

I have this and not the biggest fan. The whole panel sags once weight goes on.

I agree it sags. I had an upholstery shop sew a Velcro strip across the entire top edge and attached the other side of adhesive Velcro to the tailgate with good results.

 

[shane_02112]

Thank you. Seems like a really good idea and use of space but it’s got to be functional

 

[shane_02112]

Thank you! Ford is costing themselves business

 

[Faust]

Not sure if you ended up with something for back there yet; however, I bought this a while back and really really like the look/quality. I have a fair amount loaded into it and haven't noticed any sagging or such.

https://xgcargo.com/collections/bronco/products/bronco-tailgate-storage

 

[shane_02112]

Thank you- I have not purchased anything yet, still looking at different products.

Sponsored