GRMS radios

[kcmusa]

I want to get
Y from the handheld and go with a true mounted Mobil unit and antenna.
what are some recommendations from those of you using them?

Sponsored

 

[Timbow]

(34) Super Clean GMRS Radio Install! | Bronco6G - 2021+ Ford Bronco & Bronco Raptor Forum, News, Blog & Owners Community

I have this similar setup with a hand held in glove box for the spotter.

 

[JediMcMuffin]

Personally, I like the look of these two:

The MXT275 puts all the controls into the microphone but is a little older. The MXT115P has noise canceling to filter out background noise and is a little newer. There is another model imminent that may be worth waiting for.

There are 50W versions, but I think 15W is enough for almost anyone.

 

[dadjoke]

(34) Super Clean GMRS Radio Install! | Bronco6G - 2021+ Ford Bronco & Bronco Raptor Forum, News, Blog & Owners Community

I have this similar setup with a hand held in glove box for the spotter.

I'll second this one. Radio is almost completely undetectable when the handset is disconnected, positioning is solid...the only difference is I hardwired mine without using the upfitter switch.

 

[crzyhawk]

I've got the Midland MXT275 in my Bronco, seems to work fine.

 

[Valhalla]

MXT275 under the center console with the hand unit plugging at the cellphone heater. I use a set of midland handhelds for spotting.

 

[BD6G]

I have been very impressed with the Rugged Radios G1. I have it mounted to my @Mountains2Metal center console MOLLE I have put together a “kit” using Bullet Point Mounting Solutions hardware to create a speaker and magnetic mic holder. This has been great as I wear hearing aids and having that speaker there really helps me not miss communications and I opted for the stealth antenna that I mounted using mountains 2 Metal antenna mount on the SPV a pillar mounts.

 

[Neps]

MXT275 under the center console with the hand unit plugging at the cellphone heater.

What he said, I'm running the same set up.

 

[Oldhippie]

I also have a midland 275 mounted in the console with external speaker centered above windshield…get a good antenna and it is all ya should need…also have some Radioddity gm30 handhelds for out of vehicle and loaners

 

[HighVelocity]

@NotARubicon may have some opinions on this subject.

I use a Btech radio that's not part 95 approved because I like to live dangerously, and it irks all the radio dorks. (I also don't have my HAM license because I find all the HAM nerds insufferable.) I don't transmit on frequencies I've not obtained government permission for - I swear Mr. FCC agent and radio goon taddle-tells.

My antenna is a stubby on a magnetic mount on the roll bar. Yes, it's inside the hard top. No, it doesn't transmit to Mars. Yes, it works fantastically on the road and the few times I've actually cared about what somebody else says on some backcountry roads. Mounting it 10" higher and all the trouble associated with running cabling outside the vehicle isn't worth the effort to me. For vehicle-to vehicle comms, which my wife and I regularly do on trips in separate vehicles, we get all the fars we need.

Point of this is don't fret too much about equipment and an Instafacespace photogenic installation. A decent handheld is honestly more than most people actually need, but the convenience of a portable is worth the extra effort if you use it a lot.

Sponsored