Ford Performance Tailgate Reinforcement?

[H0pelessOpus]

I ended up piecing it together on my own, it was the two hinges, the steel/plastic reinforcement plate, four bolts, and two plastic plugs. As a previous commenter mentioned, ran about $600 total. Only quirk was having to trim a bit of plastic off the spare tire mount as the Raptor plate is notched differently. Most difficult part was getting the tailgate to align correctly all by myself but was eventually able to sort it.

Oh, and you need a new Bronco badge because you have to pull the stock one off.

Looks great! Do you happen to have the part #s?

Sponsored

 

[coadr]

Looks great! Do you happen to have the part #s?

Here ya go! Part number and quantity

w721746s450b - 4
w721479s300 - 2
n2dz7826800a - 1
n2dz7842900a - 1
n2dz1a430b - 1
w718426s450 - 4

 

[H0pelessOpus]

Here ya go! Part number and quantity

w721746s450b - 4
w721479s300 - 2
n2dz7826800a - 1
n2dz7842900a - 1
n2dz1a430b - 1
w718426s450 - 4

Cheers!

 

[cbs]

FYI I received a reply from Ford Performance that they are making an official kit for the Raptor-style swing gate reinforcement but there is no ETA. I am going to be patient and wait for that.

Any additional information on this? Patiently waiting!

Sponsored