Fog light plug part number?

[Skeener801]

Tried searching, but couldn't find what I'm looking for, hopefully you guys can help. I looking for the pigtail for factory fog lights, but I need the fog light end (male) I have found the female unit, but I want to plug aftermarket lights into the factory female plug so I can operate them with the factory switch. Any help would be great!

Sponsored

 

[Ducati1098]

https://www.bronco6g.com/forum/threads/availalbe-now-hd-modular-bumper-fog-light-pigtails.42061/

 

[Skeener801]

https://www.bronco6g.com/forum/threads/availalbe-now-hd-modular-bumper-fog-light-pigtails.42061/

Dammit! I searched for like 45 minutes and couldn't find that thread. Haha. Thank you!

 

[4x4TruckLEDs.com]

Tried searching, but couldn't find what I'm looking for, hopefully you guys can help. I looking for the pigtail for factory fog lights, but I need the fog light end (male) I have found the female unit, but I want to plug aftermarket lights into the factory female plug so I can operate them with the factory switch. Any help would be great!

What bumper? We sell pigtails at 4x4TruckLEDs.com

 

[da_jokker]

Tried searching, but couldn't find what I'm looking for, hopefully you guys can help. I looking for the pigtail for factory fog lights, but I need the fog light end (male) I have found the female unit, but I want to plug aftermarket lights into the factory female plug so I can operate them with the factory switch. Any help would be great!

Just bought these .. $8

iJDMTOY (2) H11 H8 H9 Extension... https://www.amazon.com/dp/B00TXRWOPA

Fogs are coming today so I should know if they work ASAP. (Going to cut the one end off and only use the plug for the existing wire side)

 

[Skeener801]

What bumper? We sell pigtails at 4x4TruckLEDs.com

I had a capable bumper with factory dogs, I have since upgraded to a modular front, but still wish to use the factory fog light button for some of my added lights.

 

[The Bronc]

I am wanting to do the exact same thing. Please post what you used and how it worked out.

 

[4x4TruckLEDs.com]

I had a capable bumper with factory dogs, I have since upgraded to a modular front, but still wish to use the factory fog light button for some of my added lights.

So the capable bumper uses H11 for the plug. Depending on what lights you have and what connector they use

2-Pin DT: https://www.4x4truckleds.com/diode-dynamics-deutsch-dt-adapter-wires-h11-h8-h9-800-881-pair/

4-Pin DT (2 power wires, 1 back-light wire): https://www.4x4truckleds.com/diode-...wires-w-backlight-tap-h11-h8-h9-880-881-pair/

2-Pin WP: https://www.4x4truckleds.com/crysta...gtail-pair-2021-ford-bronco-w-plastic-bumper/

 

[4x4TruckLEDs.com]

I am wanting to do the exact same thing. Please post what you used and how it worked out.

It all depends what bumper you have from the factory, as each bumper has a different wiring setup

 

[The Bronc]

Just bought these .. $8

iJDMTOY (2) H11 H8 H9 Extension... https://www.amazon.com/dp/B00TXRWOPA

Fogs are coming today so I should know if they work ASAP. (Going to cut the one end off and only use the plug for the existing wire side)

Did these work?

 

[The Bronc]

It all depends what bumper you have from the factory, as each bumper has a different wiring setup

Which is the correct harness for the capable bumper? I am wanting to remove my capable bumper with factory fog lights (lux package) and install a factory modular bumper and add after market fog lights. I want to be able to operate the after market fog lights with the factory wiring and factory fog light switch. Thanks

 

[Skeener801]

I am wanting to do the exact same thing. Please post what you used and how it worked out.

Will do!

 

[Skeener801]

So the capable bumper uses H11 for the plug. Depending on what lights you have and what connector they use

2-Pin DT: https://www.4x4truckleds.com/diode-dynamics-deutsch-dt-adapter-wires-h11-h8-h9-800-881-pair/

4-Pin DT (2 power wires, 1 back-light wire): https://www.4x4truckleds.com/diode-...wires-w-backlight-tap-h11-h8-h9-880-881-pair/

2-Pin WP: https://www.4x4truckleds.com/crysta...gtail-pair-2021-ford-bronco-w-plastic-bumper/

Awesome! Thank you!

 

[4x4TruckLEDs.com]

Which is the correct harness for the capable bumper? I am wanting to remove my capable bumper with factory fog lights (lux package) and install a factory modular bumper and add after market fog lights. I want to be able to operate the after market fog lights with the factory wiring and factory fog light switch. Thanks

See my post earlier about the capable bumper

 

[da_jokker]

Did these work?

I should know today, maybe tomorrow. I just got the adapters delivered yesterday from Amazon, and the fog lights are coming today sometime. So if they get here early enough, I'll install them today.

Sponsored