I really want the upgraded he steering rack out of all the raptor partsā¦oh and the dash they should have put in the regular broncos from the startHello everyone:
So I love the Bronco Raptor but wish it was available in a 2 door. I am going for looks over performance right now. Let's say you get a 2.7L Sasquatch (doesn't matter what trim) and add the following:
-Bronco Raptor or Ranger Raptor rims
-Bronco Raptor grille
-Bronco Raptor Headlights and Taillights
-Maybe a 2.7L tune?
Now for the big question. Would Bronco Raptor Suspension pieces, hood, bumper and fender flares bolt right up to a regular a Bronco?
Thanks!
Edit: Nevermind a shorter wheelbase won't hurt things
I'll be honest, I love that grille except for one minor detail. I wish the letters weren't as spaced out. Otherwise than that I love it and your bumper!I just installed a Raptor grille on my black diamond today. Very simple and bolted right up. I assume everything else would also work the same way. Going to get the Raptor front fenders too
Well the HOSS 3.0 has the steering rack from the Bronco Raptor.I really want the upgraded he steering rack out of all the raptor partsā¦oh and the dash they should have put in the regular broncos from the start
You are correct but canāt get in badlands I donāt believe for some odd reason and I already own my badsquatch. I would just like to purchase the rack from ford and install myself but I donāt see a chance of them selling for a few years at best
Yah I'm wondering when they'll start selling it as an accessory.
That is definitely a knock off grill. Here is an OEM on my two-door:I just installed a Raptor grille on my black diamond today. Very simple and bolted right up. I assume everything else would also work the same way. Going to get the Raptor front fenders too
Yep drop shipped from cali by a Chinese company but I havenāt been able to find the OEM anywhere.That is definitely a knock off grill. Here is an OEM on my two-door:
There was a thread a couple weeks back on this topic. There is an issue with coding anything but the OEM rack with non-matching VINs. Theretically, this is to prevent theft.
That looks way better. How'd you get the OEM?That is definitely a knock off grill. Here is an OEM on my two-door:
No, the suspension pieces off a Braptor do NOT bolt right up, unfortunately there are numerous differences. the differences are... lug bolt patterns, UCA mounts, tie rod taper, UCA and LCA ball joint tapers, knuckles, unit bearings, ABS sensors, CV joints, and IWE, of course the shock towers and UCA angle are also different. . all of these need a work around to make it function.Hello everyone:
So I love the Bronco Raptor but wish it was available in a 2 door. I am going for looks over performance right now. Let's say you get a 2.7L Sasquatch (doesn't matter what trim) and add the following:
-Bronco Raptor or Ranger Raptor rims
-Bronco Raptor grille
-Bronco Raptor Headlights and Taillights
-Maybe a 2.7L tune?
Now for the big question. Would Bronco Raptor Suspension pieces, hood, bumper and fender flares bolt right up to a regular a Bronco?
Thanks!
Edit: Nevermind a shorter wheelbase won't hurt things
| Ranger Raptor Parts List | ||||
| Part No | Description | Quantity | Price/unit ($CAD) | Total Price ($CAD) |
| MB3Z-3K186-E | Knuckle Side 1 | 1 | 427 | 427 |
| MB3Z-3K185-E | Knuckle Side 2 | 1 | 412 | 412 |
| MB3Z-3085-D | UCA Side 1 | 1 | 122 | 122 |
| MB3Z-3084-D | UCA Side 2 | 1 | 123 | 123 |
| MB3Z-3078-C | LCA Side 1 | 1 | 386 | 386 |
| MB3Z-3079-C | LCA Side 2 | 1 | 376 | 376 |
| MB3Z-3A427-J | Left front axle | 1 | 475 | 475 |
| MB3Z-3A428-M | Right front axle | 1 | 482 | 482 |
| MB3Z-18125-BU | Left front shock | 1 | 1505 | 1505 |
| MB3Z-18125-BT | Right front shock | 1 | 1505 | 1505 |
| MB3Z-18089-H | Left shock protect | 1 | 172 | 172 |
| MB3Z-18089-J | Right shock protect | 1 | 172 | 172 |
| PB3Z-5K570-B | Bump Stops | 2 | 71 | 142 |
| MB3Z-5560-DZ | Springs | 2 | 198 | 396 |
| MB3Z-18K050-A | Shock Mount cover | 2 | 21 | 42 |
| MB3Z-5415-C | Insulator | 2 | 54 | 108 |
| MB3Z-18124-BM | Rear shock | 2 | 163 | 326 |
| MB3Z-5310-BK | Rear spring | 2 | 183 | 366 |
| MB3Z-5415-C | Insulator | 2 | 54 | 108 |
| MB3Z-18A099-C | Strut Mount | 2 | 100 | 200 |
I can't verify that all the part numbers are exactly correct however your assumptions are absolutely correct! I HAVE VERIFIED all of the parts will bolt right on from the ranger Raptor although you would also need the brake calipers and rotors and caliper brackets that's because the Bronco ones don't fit on the RR knuckle ( you could also just use Bronco Knuckle) and finally a sway bar link for each side.
