Bronco Team 2 door.

[Ramble_Offroad]

PSA for anyone running Icon XD tie rods, the “L” & “R” markings molded into the item is apparently backwards. Start at post #274 and read on. (And yes, mine are installed backwards)

https://www.bronco6g.com/forum/threads/icon-xd-forged-tie-rods.56420/page-19

Sponsored

 

[Deb68nc]

Not far from you at all, I live on the Morrisville/Cary border. Yes, we will need to do a meetup. I had my windows tinted at Custom Tint in Apex, I've dealt with them in the past for tints and wraps, top notch. Not really familiar with audio places, I have the B&O and did a speaker upgrade which really helped. If you do a search on here you can find several threads about upgrading the sound system.

Did you get the front window tint to match the shade of the rear? If not what percent did you do for both?

 

[TheShark]

Did you get the front window tint to match the shade of the rear? If not what percent did you do for both?

That's not legal in NC, the rear tint on a SUV/Truck can be pretty much anything you want but In North Carolina, the legal tint limit for the front side windows is 35%, meaning that the tint cannot allow less than 35% of light to pass through.

 

[Rgarthwaite]

Thanks and yes both front and back is Rough Country

On your bumper which light package did you go with? I see 3 options to order but want to make sure the light bar is white lights and not amber.

 

[Deleted User 5719102]

On your bumper which light package did you go with? I see 3 options to order but want to make sure the light bar is white lights and not amber.

All the lights are white, no ambers on the bumpers.

 

[Rgarthwaite]

All the lights are white, no ambers on the bumpers.

Great thank you!!

 

[peterh]

After a year of mods..tadahh finished..lift and 37s last on..

Man I really like the wheel tire set-up - are those Ranger take offs?

 

[Rick Astley]

While you are right about FE’s sounding great you are wrong about them being big blocks. They are “Midsize Blocks” and the best engines ever made in my opinion.

Great Cars!!!!

I'd argue that between 1958 and about 1965 the Ford Edsel V8's were absolutely big blocks. Sure by the mid/late 60's you get the 427's sorted and bigger "big blocks" came available. Most of them evolutions of the wisdom gained by the FE's dominating their time period.

Like the Flathead V8 being the unquestioned king of the streets...... Until the day the Rocket 88's came out and fatties suddenly became chopped liver.

I do tend to look at things strictly within the year they came out to see how cool they were. Time and progress have no finish line and no winner.

 

[Rick Astley]

PSA for anyone running Icon XD tie rods, the “L” & “R” markings molded into the item is apparently backwards. Start at post #274 and read on. (And yes, mine are installed backwards)

https://www.bronco6g.com/forum/threads/icon-xd-forged-tie-rods.56420/page-19

It sucks but there's always teething problems. If true, it's crazy that Icon didn't supply casting info for side and even crazier the caster arbitrarily added it.

FWIW, it was your unfortunate experience yet adding to group wisdom that aided others. Myself included..... She's getting them installed (correctly) as we speak as I'm staring down a spinal surgery and unable to wrench.

4' lift looks bad-ass! The Race Red Ford Fusion looks like a smooshed little exotic next to a lifted 2-door Bronco!

 

[Ramble_Offroad]

It sucks but there's always teething problems. If true, it's crazy that Icon didn't supply casting info for side and even crazier the caster arbitrarily added it.

FWIW, it was your unfortunate experience yet adding to group wisdom that aided others. Myself included..... She's getting them installed (correctly) as we speak as I'm staring down a spinal surgery and unable to wrench.

4' lift looks bad-ass! The Race Red Ford Fusion looks like a smooshed little exotic next to a lifted 2-door Bronco!

Agreed, welcome to the aftermarket maturation of a new platform. I’m 100% confident that I’m not the only one who installed or had them installed backwards. I’m not much of a mechanic, I’m sure it would not be hard to swap them. However since I don’t have a boot clamping tool, prior experience pulling a tie rod, and it would need a new alignment I plan to take it to a trusted shop and have it done. Just salty about the time & additional $ to make it happen.

Happy to help you get them installed “correctly”, let’s hope we actually know Left from Right now.

Good luck with your surgery, that’s no fun.

 

[Sooner]

I'd argue that between 1958 and about 1965 the Ford Edsel V8's were absolutely big blocks. Sure by the mid/late 60's you get the 427's sorted and bigger "big blocks" came available. Most of them evolutions of the wisdom gained by the FE's dominating their time period.

Like the Flathead V8 being the unquestioned king of the streets...... Until the day the Rocket 88's came out and fatties suddenly became chopped liver.

I do tend to look at things strictly within the year they came out to see how cool they were. Time and progress have no finish line and no winner.

I agree with a lot of that but you have to ask yourself what transmission will bolt to an FE. Good luck with the surgery, pray everything goes well.

 

[SeaVee]

Starting to dig everyone’s takes on the 2 tones from the 80’s-90’s. My daughter spotted this one in Jupiter last week

 

[Rick Astley]

I agree with a lot of that but you have to ask yourself what transmission will bolt to an FE. Good luck with the surgery, pray everything goes well.

Ha ha!!!! In a 3rd gen T-bird your transmission options are:

• 3-speed cruise-o-matic MX
• Or
• 3-speed cruise-o-matic MX

Not to mention horrific gearing in the T-birds. They were highway cruisers.
Gears are swapped and she will lay rubber. But I keep a spare MX for just such an occasion. Can still find them for $200-300 and not worth rebuilding. C4's are a wet-dream.

Appreciate the kind words and dare I say, sounds like it would be fun to hang out in the garage together and talk cars while maybe having a beer or two. All your opinions shared are right on! Just that the 3rd gen T-bird, unfortunately, locks you into not many options without enough fabrication to just pick a better chassis...
It's okay though, her older sister is due for some reassembly and hitting the road this summer. That 2-door lifestyle!

 

[HokieinMI]

Before

so far

Love the flares! I am waiting for better weather to install mine but so excited. Such a great change in the look.

 

[HokieinMI]

Had the 2” Ford Performance lift installed. Love it so far.

Sponsored