Bronco Raptor With Proper Lights Setup

[‘21OBX]

Has anyone claimed the stock raptor lights and mounts? Nothing against your guys awesome setups. I find the raptor two light setup pretty clean.

Sponsored

 

[JetG]

It's the Baja Designs kit here: https://www.4x4truckleds.com/baja-designs-a-pillar-kit-for-2021-ford-bronco/

Thanks is there any way to do a LP6

It's the Baja Designs kit here: https://www.4x4truckleds.com/baja-designs-a-pillar-kit-for-2021-ford-bronco/

Thanks is there anyway to do the lp6 ?

 

[4x4TruckLEDs.com]

Thanks is there any way to do a LP6


Thanks is there anyway to do the lp6 ?

You don't want to run LP6 up there. They are way too big. They are also going to hit the antenna so they won't fit

 

[Johnny Rebel]

You don't want to run LP6 up there. They are way too big. They are also going to hit the antenna so they won't fit

I mounted my LP6’s on the pillars this weekend and agree 100%. They’re too big for that location, so will be moved to the front bumper. Plus, the glare reflecting off the hood is distracting.

 

[Raptor911]

Their warranty is GOOD. Had an issue with my LP6 and even though I purchased them from 4x4truckleds.com, I just went straight to BajaDesigns and they paid for shipping of 4 LP6s back to them and rebuilt them and sent them back to me.

Good to know. Big fan of their lights. Once my Bronco arrives I will order a set from you guys.

 

[Raptor911]

Can you post a pic of the front camera view?

We picked this up at the dealer yesterday for a friend of ours. Drove it straight to our shop and began working on it....

 

[4x4TruckLEDs.com]

Can you post a pic of the front camera view?

 

[Raptor911]

stock raptor lights are not good. It is the same setup on the GEN3 F150 Raptor. Also, I am not sure they will fit the base bronco and also how would you wire them up as 1 pair go to the fog light.

Has anyone claimed the stock raptor lights and mounts? Nothing against your guys awesome setups. I find the raptor two light setup pretty clean.

 

[4x4TruckLEDs.com]

stock raptor lights are not good. It is the same setup on the GEN3 F150 Raptor. Also, I am sure they will fit the base bronco and also how would you wire them up as 1 pair go to the fog light.

The factory Rigid fogs off a Bronco Raptor will not fit the regular Broncos with HD Modulars. The Bronco Raptor has extra mounting points on the back of the bumper that are required for the rigid fogs (but it's not a good upgrade, better to spend money on a Diode Dynamics or Baja Designs kit)

 

[Raptor911]

Thank you for the pic. can you also post the 360 pic?

So how much $$ is the 5 LP4 on the mod bumper? Also can you wire them up separately? For example, 3 to one switch and 2 of them to a another switch. I will be wiring them up to a switch pro.

 

[4x4TruckLEDs.com]

Thank you for the pic.

So how much $$ is the 5 LP4 on the mod bumper? Also can you wire them up separately? For example, 3 to one switch and 2 of them to a another switch. I will be wiring them up to a switch pro.

It's a 6x LP4 setup. We didn't do a 5x LP4 setup

https://www.4x4truckleds.com/baja-d...4-pro-for-2021-ford-bronco-hd-modular-bumper/

It's $2,899.95 for the 6x LP4 kit.

They are daisy chained to each other but you can certainly buy a 2nd harness if you wanted to put them on 2 switches. Or 2 extra harnesses to have each pair on it's own switch.

Each pair of lights is 15 amps

I don't know 100% if 5x LP4 will fit with the brackets, nor do we plan to try right now unless someone hands us $$ to build the kit The truck is already built with 6x LP4

 

[SwampCactus]

Looks so much better than those cheap looking Rigid lights.

 

[vrtical]

This is great, one of the first mods I am doing is addressing the lights.

 

[‘21OBX]

I

stock raptor lights are not good. It is the same setup on the GEN3 F150 Raptor. Also, I am not sure they will fit the base bronco and also how would you wire them up as 1 pair go to the fog light.

I don’t have a base, I’ve seen the raptor lights mounted in a standard bronco mid bumper at a meet so it’s entirely possible. I just can’t warm up to the three lights there. I like the closed off two light setup. If I was going to do it.

 

[Raptor911]

will not fit .. Per the OP >> The factory Rigid fogs off a Bronco Raptor will not fit the regular Broncos with HD Modulars. The Bronco Raptor has extra mounting points on the back of the bumper that are required for the rigid fogs (but it's not a good upgrade, better to spend money on a Diode Dynamics or Baja Designs kit)

again, the Rigid lights are the cheapest ones they make. If you proper pocket lights then do DD or Baja lights

I

I don’t have a base, I’ve seen the raptor lights mounted in a standard bronco mid bumper at a meet so it’s entirely possible. I just can’t warm up to the three lights there. I like the closed off two light setup. If I was going to do it.

Sponsored