Search results

Your call as it is your car and setup. My unsolicited advice would be to sum inputs 1 & 2, set your levels for front/rear balance with the LC7 and use the remote ACR accessory as your sub level control. You will lose your front and rear fade from the head unit, but otherwise that seems the...

Good Luck! Hope it works. FYI - here are the signals you are getting front vs rear:

Have you tried turning on the channel summing? If there is no low range signal going to channel 2 input (like the rear speaker line) there is nothing the LC7 can do about that. Unless you sum the channels. If you get something when you turn on channel sum, then you know it is the rear speaker...

That is exactly what I used for my setup. Speedwire to go from head unit to amp and 14 gauge speaker wire from amp to speakers. 10 gauge speaker wire for the sub. https://www.bronco6g.com/forum/thre...-and-sub-lots-of-pictures.43856/#post-1403301

What is your input to Channel 2? If you are using the rear speaker input on channel 2 you might not get anything out of output 3 if you are not summing the front and rears. I'm thinking that would be the case if the auto feature only uses channel 3 for sub signals and has some kind of low pass...

Exactly what other folks said. Forscan can lock and unlock lots of things, but if you are looking for audio optimization a DSP is the way to go. I looked really hard at the available options from Audio Control and JL as those ended up being my top 2 choices for a DSP/amp integrated unit...

Everyone has pretty much summed it up. If you are going to have someone else install it for you (if I read right) you might as well go with a better amp than the Kicker Keys. If you want cheap and easy, Kicker Keys are awesome. From the looks of what you want to do with the speakers, the...

I would ask a lot of questions about this install. Looks like they might be upcharging you for the components. For example, D-5.1300 is $1300 everywhere else. You are paying for 2 sets of 6.5" speakers, assuming that is to use one set for the center channel? But why upgrade the center...

5 Icon Rebounds for sale. 17x8.5, 0 offset. I used them for less than 1000 miles and then went with a different option. Asking $1000 for the set, but open to offers. (more like I need to get them out of my garage)

Les - check with Audio Control about your GTO. You probably need this to trick your head unit into sending a signal without the factory speakers: https://www.audiocontrol.com/car-audio/accessories/ac-lgd-20/ Then GTO will work. Or use a remote wire, which is easy to add if you are already in...

You can get either a loop back harness or T harness from multiple places. Yes, PNP can do both. Nothing magical about connecting to the D-5.1300, the harness will just be wires in to the speaker level inputs and wires out to go back to the factory speaker wire (if you go with a loop back)...

The 3-way system you linked will probably sound great wherever you put the tweeters. You may want to think about feeding them with a different amp. The 200.4 probably doesn't have enough juice to get the most from those speakers (or any 3-way setup). Unless you are going to bridge it and run...

What are you trying to achieve? Lots of people are happy with the Kicker Key route and possibly the underseat/hideaway subs. If you don't want to get too crazy and you just want more, this is a perfect route. If you want to go to a bigger amp with more power and a real sub, then you open up a...

Not exactly sure what you are asking. From your earlier pictures you have the speaker outputs from the back of the head unit accessible. If you are going to use speedwire it becomes super easy. I cut my factory speaker wire harness a little ways after it comes out of the head unit. Use the...

If you use the GTO for your AC amp, you can use that to trigger your mono amp. Run a wire from the Remote In/Out terminal on the AC amp to the remote terminal on the mono. Should work fine, at least it has in my other cars.

Yes, if you are using speedwire, it goes from your radio speaker wires the speaker level inputs you have the yellow and blue arrows on. Nice looking speaker plates and amp rack!

The sub should be pretty easy. You don't need to tap anything. Your Audio Control amp should have a sub output that you can run RCAs from to your sub amp. As long as you have a full range signal to your AC amp (kick panel feed), you can feed the sub amp through the AC amp. Your build looks...

I did something similar running my own speaker wire: https://www.bronco6g.com/forum/threads/complete-stereo-install-amp-dsp-speakers-and-sub-lots-of-pictures.43856/ If I am following correctly, you need to take your new speaker wires back to behind the head unit. Then either cut off or add a...

No problems, I bought them as a temporary wheel since the ones I planned on were having manufacturing and shipping delays. I am looking to get $1000 for all five. They are basically new in original boxes. I can assist with shipping and we could split the cost?

Still available.