What about a 5-channel amp? Instead of wiring and hiding 2 amps?
https://www.bronco6g.com/forum/threads/complete-stereo-install-amp-dsp-speakers-and-sub-lots-of-pictures.43856/
It's your money and your car. This is a tough question. Ordinarily I'd say that if the extra $1K isn't going to be an issue, just get the better system and don't look back. However, in the Bronco you might not notice how much better it is since the ambient noise is so high.
If you are a...
You are going to have to do some cutting and wire stripping. I don't think that the plug for the key will fit even another kicker amp.
But you have the wires that carry the signal to the key and then the wires that carry the amplified signal to the speakers all in one place. With the key...
Couldn't agree more.
To the OP - switching to a more powerful 4-channel amp will open up a world of better sound to you. The Kicker KSC and CSC can take a lot more power than the Key can put out. The Key gives you easy, cheap and small, but power and quality of signal are not its thing. I...
If you fade to the rear and you have the rear speaker inputs feeding your 3/4 you will definitely lose the bass as you fade more. I use the amp controls to balance the front/rear and never touch it on the head unit. Good luck with the tuning, I went through a few rounds to try and get better...
No issues like that. However, I am summing my channels 1/2 and 3/4 inputs and sending one signal to all 5 output channels. I have a couple of thoughts though. To get the 3/4 input channel to output to the sub I think you need to sum the 3/4 and 5/6 channel. But if your 3/4 inputs are from...
You might try one of the Seiko Prospex automatics. One of my favorites with a great automatic movement, day/date function and virtually indestructible. For an automatic. (It's not a G-Shock)
Awesome! I got a Jupiter for my son when they first released and Venus for my wife this Christmas. Fun watches, and as you said, like a Speedy but lighter. Much lighter.
That should be a good setup. Not sure if you have considered a DSP/amp combo or a separate DSP. The ability to really tune the sound across the entire range is a huge benefit. Not sure if the JL XD700 will have enough parameters to really fine tune the sound. I say this only because I have...
Seems to work fine for me. I am not a car audio expert, but I do agree that the mid bass speaker location is not ideal. When I did the time alignment for the DSP setup I used the mid bass distance as the tweeter frequencies travel faster and are bouncing off the windshield. I think.
I have...
Not apples to apples, but here is what I have observed:
In the Bronco I have the 12" Kicker with passive radiator. Audio Control amp with a rated 500W for the sub. ( I know power ratings are grain of salt, but this is for comparison)...
Not using the LC2i in my Bronco, but here is how I set it up in my Civic Si. Power distribution block to split the 12V coming direct from the battery. LC2i triggers the amp remote turn on through GTO.
I made the bracket from 1/4" plexiglass and metal L brackets.
I can access the plug-in for my laptop through the hole where the storage cubby used to be. Anytime I want to adjust the amp I just plug in my laptop.
Panel removal is just like any other plastic panel. Use panel pry tools and...