Somethingās not right. I had a similar noise in a Toyota engine and it was a fragment of a valve guide that was embedded in the piston and making slight contact with the head.
These electronic gremlins are really getting annoying. I keep getting sway bar disconnect alarms and now pre-collision assist failure. They come and go on there own usually. Been back to the dealership and said nothing in the alarm log, they did reset the plug you are talking about behind the...
How much horsepower do you need before it just becomes useless? I donāt really know.
To me the bronco 6G has always screamed āV8ā, if even just for the exhaust note.
First time out there with limited time I would seriously look into a guided tour where you could relax and enjoy the ride. It could save you some serious time and trial and error. There is just so much to see and do that itās hard to decide. Rely on someone elseās expertise that first trip.
Wheels and tires will make a huge difference. Stock ones off a badlands might be just right. The Bronco just doesnāt look right with the base sized ones.
Unfortunately yes, wipe down with oil and get what you can off and then wipe with moly chassis grease occasionally. The rust you see doesnāt affect function but looks terrible.
Iād say find a different dealer but unfortunately most Bronco owners know more about the Bronco than the dealers.
Went through the same confusion about 5 tire rotation. From now on Iām doing that myself.
I like the engine heater, is it needed? Probably not except in rare cases.
But itās just easier on the vehicle, warms up quickly to defrost (MT), warms the oil about 10 degrees above ambient temperature and keeps the under hood temp a little warmer which the battery likes. No downside except a...
Another comment on lockers, when this became a factory option I jumped on it. No better time to get them.
Iāve got a small front wheel assist tractor with a rear locker, there are many times when Iām hung up with one front and one rear tire off the ground and Iām not going anywhere. Engage the...