Sponsored
HPNQ420's latest activity
-
HPNQ420 reacted to Brian_B's post in the thread Is Vitro an acceptance OEM glass for repair? with
Like.
I think you are fine on the brand name. Not sure if M505 is the same tint as M403. Other than the manufacturing plant being different... -
HPNQ420 replied to the thread Footwear for offroad.In general outdoors I wear military boots, Danner Reckoning EGA Gore-Tex if it's going to be wet but not over boots, old school McRae...
-
The winch alone is close to that. It's a good deal i.m.o. The modifications for the capable bumper weren't bad I.m.o., though it will...
-
Itās a pretty good kit all in all. One of the few that includes frame mount reenforcements
-
HPNQ420 replied to the thread [How-To] FORScan Audio/Speaker Mods.On my '23 Bronco BD (original subwoofer delete), I have the Ford Focus amp with a Kicker 6.5". Polk DB402 in the dash and pods. Memphis...
-
Thank you for the advice. That makes sense. Iāll probably do that in the next iteration of this project. Now that the car is all put...
-
Looks like a mall crawling school busā¦š¤Ŗš¤Ŗšā¦37ās with spacer lift & 1ā body lift is my guess, but no way to know without crawling under thereā¦
-
HPNQ420 reacted to SeptuagenerianSasquatch's post in the thread Anyone have any info on this setup? with Like.
Looks very capable, but he ain't rock crawling with those steps.
-
HPNQ420 reacted to Big Boss's post in the thread Torn between tire sizes and cannot decide on my 2-door non SAS 3.73 bronco with Like.
I went Baja Boss AT 285/70 on my big bend with the 3.73 rear end. Totally changed the look. You can definitely feel the added weight...
-
HPNQ420 reacted to Figmo's post in the thread #2 lug from WARN power interrupt to positive terminal: What am I missing? with Like.
Just take the damn thing to the magic bench grinder and shave a few thou off each side. Presto-Changoā¦..youāve got a lug that is now...
-
HPNQ420 reacted to Hyperbolic_Tangent's post in the thread Steelies ? Black appearance package wheel with bigger tires ? with Like.
Hoss 3.0 (so stock SAS height) on black diamond steelies with 35x11.5 Toyo AT3
-
BRaptor flares should be recalled just for being fugly.
-
HPNQ420 reacted to HoosierDaddy's post in the thread Best A/T Tires Review: Pirelli Scorpion XTM AT, Nokian Outpost NAT, BFG KO3, Westlake SL369, Wrangler Duratrac RT, Wildpeak AT4, Recon Grappler with Like.
That's shocking to read. Which Baja Bosses? From everything I've read, the AT'S have been getting stellar reviews EVERYWHERE...
-
HPNQ420 reacted to Squatch's post in the thread Jay Leno features the Bronco Roadster Concept with Like.
A manual two-door with a tailgate... so, somebody at Ford does know what people want.
-
A few recommendations after having jumped into this rabbit hole and ending up in a cycle of upgrades: First, I do not recommend...
-
HPNQ420 replied to the thread [How-To] FORScan Audio/Speaker Mods.It wouldn't hurt, but... I think you would have better results for nothing but labor and a few feet of good quality wire by running the...
-
HPNQ420 replied to the thread Tales of a MIC Top rattle...finally fixed.You might have the same issue. Before you start, I would align all the top panels as well as possible. The latch strikes are attached to...
-
HPNQ420 reacted to Bronco Damen's post in the thread MIL (Malfunction Indicator Lamp) light on 3 days after oil change with Like.
***Update*** It was the oil filter housing........I didnt have it tight enough :curse:
-
HPNQ420 reacted to dpAtlanta's post in the thread How far away are the Green/Yellow/Red warnings when backing? with Like.
I posted this in Ranger6G since I just bought a Ranger Raptor. But the distances are pretty much the same at each color warning thingy...
-
HPNQ420 reacted to userdude's post in the thread Need advice: Bilstein 5100 vs. 6112 (or mixed setup) with Like.
Details, details... lol Fair enough, all good points.
-
HPNQ420 replied to the thread Good price for a damaged (4 door) MIC top without glass?.West System Epoxy bonds just fine to it.
-
HPNQ420 replied to the thread Need advice: Bilstein 5100 vs. 6112 (or mixed setup).Hoss 2.0 takeoffs for $400: You are gambling with premature failure and you have no idea if you are getting the proper spring rate...
-
HPNQ420 reacted to Snacktime's post in the thread Need advice: Bilstein 5100 vs. 6112 (or mixed setup) with Like.
I agree! 4wp shocks are definitely the best option still available for the price. Several people have 60k+ miles on them which is...
-
Here is my non-sas BD with those tires and stock BD wheels.
-
HPNQ420 reacted to popo_patty's post in the thread King 2.5 Remote Reservoir Coilovers NOT compatible with Bronco SAS wheel off-set with Like.
I agree, the shop is milking every cent. But if they have to reclock the hose fittings, you would absolutely need to recharge nitro. But...
-
HPNQ420 reacted to CitrusBronco's post in the thread King 2.5 Remote Reservoir Coilovers NOT compatible with Bronco SAS wheel off-set with Like.
This sucks but honestly this is what modifying is all about, finding out shit donāt work and making adjustments as needed.
-
Rear locking diff hands down. Unfortunately itās the most expensive to do after the fact if you have 3.7 gears.
-
HPNQ420 reacted to swamp2's post in the thread Major upgrade to 2023 7-speaker system on a budget with Like.
I can't post right now as EOS, but thanks much for the purchase, shout out and compliment. Appreciated. Nice total system!
-
HPNQ420 reacted to chon's post in the thread Bilstein 8112 Baseline Settings (and some shock notes) with Like.
I finally got my Bilstein 8112s installed and in my quest for some baseline settings I watched (and rewatched) many youtube videos. At...
-
We do a fair amount of off-roading but it's mostly sand and Forest roads. No interest in rock crawling.
-
HPNQ420 reacted to EveryDayBronco's post in the thread Doubled rear cross frame to increase hitch tongue weight. OEM frame is 1/8ā thin! with Like.
OEM tongue weight is 350 lbs and I want to carry my exc-f on the hitch and since the load would be farther I doubled the rear frame to...
-
It's like a two-stroke dirt bike when it comes on the pipe.....IYKYK! Seriously, I can now say I don't need or want anymore power. It's...
-
Flush mount SSC1s, Flood Beam and an SSC2 Combo - https://www.bronco6g.com/forum/threads/the-boreal-badlands.48235/post-2098430
-
HPNQ420 reacted to RlsTheBracken's post in the thread UPDATE: Hardtops need to be redesigned! Cracking and bubbling on my second hardtop replacement with Like.
@Eldowerks finally doing the write-up and picsā¦ Read the forums about cracked roofs, some on their third or fourth roof, and was glad I...
-
Weāre new around here and wanted to introduce ourselvesāthis is the team behind BRBN Off Road. We recently entered the market with a...
-
HPNQ420 reacted to CarmeloS's post in the thread 2029 GMC Jimmy coming with V8, BOF, removal roof, retro styling to take on Bronco with Like.
Needs a manual
-
HPNQ420 replied to the thread 35 x 11.5 - 17 on 55mm Offset Wheels.Any bigger than 33ās makes 1st too steep and 6th unusable below about 80 with 4.46 IMO. Mansquatch should have come with 4.89.
-
Good to know!
-
I'm amazed at how much more ability that rear locker provides. In 2021, I was able to add the rear locker, Auto 4wd Transfer Case and...
-
HPNQ420 replied to the thread 35 x 11.5 - 17 on 55mm Offset Wheels.With the 280/70-17 MT's it looks like I have about 3/4" of clearance to the UCA at full lock. These have a section width of 11.6" The...
-
-
HPNQ420 replied to the thread 35 x 11.5 - 17 on 55mm Offset Wheels.Thank you for this insight. I have crawled up inclines with only a rear locker and the 33" MT's without wheelspin where a Bronco Raptor...
-
HPNQ420 replied to the thread 35 x 11.5 - 17 on 55mm Offset Wheels.I will take a look and see how much wiggle room I have with the UCA's with the 285/70's. If it looks like I don't have much margin then...
-
Ko3 just released a 35x11.5R17 in Load C with 3 ply sidewall. Rather perfect tire for a Bronco. 11.5 works great for nearly...
-
You can try and report back, but I feel like you might contact the UCA with +55. You might also want to really do a good flex/turn test...
-
HPNQ420 replied to the thread 35 x 11.5 - 17 on 55mm Offset Wheels.To your first point, the purpose of the smaller offset wheels is to clear the control arms with tires wider than 285mm. As to your...
-
Hello all, My 2023 BD 4 door MT or is currently setup with the factory rear locker, Bilstein 5100's set at ~1.5" of lift, and 285/70-17...
-
HPNQ420 reacted to GI_Jo_Nathan's post in the thread OEM Rear Sway Bar Install with Tips and Initial Impressions with Like.
Good work writing this up. I have added the stock rear bar to mine as well. In regards to articulation, it's a common practice to add...
-
HPNQ420 reacted to Altitude's post in the thread OEM Rear Sway Bar Install with Tips and Initial Impressions with Like.
I'll admit that I was immediately intrigued when I found out that Sasquatch models were coming with a sway bar from the factory sometime...
-
Thank you! Iāll look into it. This is very helpful
-
HPNQ420 replied to the thread Custom Tire Cover recommendations!.I can highly recommend https://fourwheelcovers.com/. Here's a shot of mine when I was still on 32's; I had to have a new one made for my...
-
