What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[JZZ]

Took advantage of the sun today n Maryland for Ford Performance rear differential install

Sponsored

 

[Oldhippie]

Finished the midland mxt275 install…only 3 day for this old sick guy…

 

[Deadpool392]

Finished the midland mxt275 install…only 3 day for this old sick guy…

Tackform makes a nice mount setup for the mic.

https://www.tackform.com/products/ford-bronco-cb-radio-mount-accessory-ready-grab-handle-m618

I went with the magnetic mount for ease of use, but it is currently sold out.

https://www.tackform.com/products/f...-radio-mount-accessory-ready-grab-handle-m618

 

[Oldhippie]

Tackform makes a nice mount setup for the mic.

https://www.tackform.com/products/ford-bronco-cb-radio-mount-accessory-ready-grab-handle-m618

I went with the magnetic mount for ease of use, but it is currently sold out.

https://www.tackform.com/products/f...-radio-mount-accessory-ready-grab-handle-m618

yeah, I have a ball ordered to to mount the mic holder to, got all the other trackform stuff…had my handheld mounted like that on the grab handle…may keep that and mount the mic on the dash?

 

[Reldn]

Scheduling a trip to the dealership. Lost all boost then It threw a check engine light and P0035 code at me today.

 

[CarGuy]

Took advantage of the sun today n Maryland for Ford Performance rear differential install

Which gasket did you use - reusable (existing) or the one that came with the new diff cover?

 

[Fastmc25]

Replaced the dismal halogen reverse bulbs for Oracle led bulbs. Much brighter
Photos are before and after

“I can see clearly now”

 

[Reldn]

Working at putting the stock charge pipes, intake, and intercooler back in before taking it in next week as I know they'll blame the mods and possibly refuse to even look at it.

 

[KreeHBronco]

Yesterday and today I installed Broaddict raised cargo shelf and the fold out tailgate table on my new 2026 Badlands. I am working my way up to the Lobo hidden winch install!!

 

[Golfsnob]

Removed my canvas Jtop bimini and installed a Bronco Bikini bimini. Just didn't like the velcro on the Jtop and it flaps around to much. Haven't road tested the new top yet so we will see. It its much tighter.

 

[DaddyO]

Installed an Openroad roof top tent, updated my Gobi rack from the Soft top version to the hard top version, reinstalled my OpenRoad 270 awning. And a pair of S1 Baja lights as backup lights. Tried installing my OpenRoad shower awning with the 5 gallon water tank and the water heater but ran into an issue with the brackets. So back to the drawing board on that one.

 

[Mysilvstang]

Installed a GMRS radio using Mountain2 Metal brackets. Follow the multiple write ups here and on U-Tube. Using the dust cap to keep the antenna safe till i need it.

 

[irishmurph01]

Added B&M short shifter with newer version of twisted shifterz knob with some the help from @JawnyBronco

What adapter did you get? Twisted shifters says the regular adapter will raise the height of the knob and I obviously don’t want that with the B and M

 

[jsoa]

What adapter did you get? Twisted shifters says the regular adapter will raise the height of the knob and I obviously don’t want that with the B and M

The one pictured is their factory height knob (note, the way it locks is via blue lock-tight, which they supply, and requires a couple hours to cure)

https://www.twistedshifterz.com/col...nd-heavy-weight-custom-shift-knob-and-adapter

I tried both, and the original (the one that adds the height) felt a little too high with B&M

 

[Oldhippie]

I just installed the same radio in the consol…Do ya get any interference with the lights on with the antenna behind them? I made a mount to put my antenna above them…

Sponsored