What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[Desmolicious]

https://www.amazon.com/dp/B0CLD6VSZT?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

$19 center console cover to protect against Riley’s claws. Fits perfectly and very comfy.

You can also slip it thru the case, that second opening by the latch (furthest awayform it). It fits and would secure the camera and case if that fell off the mount entirely. Unlike a GoPro, there is no separate tether mount point.
Pic below is close to what I described, just move it over to that next open space.
ChatGPT and Gemini suggested these

In the DJI box, there is a small bag with a lens cap looking thing (for shade I read), and some little plasticy/rubber rings. Those rings are to help with keeping that bolt tight during vibration, helps it stay put better I read.

In case you were thinking of getting the SmallRig remote to use w the DJI Osmo Actin 4, don’t.
It does not work w the DJI, even though they claim it does. It does not pair. I’ve read other reviews from people w the Action 5 who say the same thing,

Sponsored

 

[BD6G]

A friend and I after discussing how to mount the Rugged Radios speaker came up with some ideas. This was his idea we went with using bullet point mounting solutions accessories. Comes out super clean and tidy doesn’t affect getting to your hero switches and adds some extra sound for us hearing impaired folks.

 

[dgorsett]

Mounted up some Amazon aux lights to replace the factory fogs that didn't look good nor perform well with the Blackhorse Bumper.

 

[NativeTexan]

Mountains 2 Metal rear cargo rack LOVE
Mounted fire extinguisher

 

[BlueBronco]

Sold it...

...and bought a BRaptor:

Okay, I didn't sell it just yet as I plan on stripping off most of the mods (bumpers, slider-steps, wheels, , hood, dirt logic suspension, chip tuner, lights, etc, etc) and returning it back to stock before selling. Then, some of those mods will eventually find their way on to my new Bronco.

Then: 2021 BL 2.3 manual high package, softie, lots of mods (former SEMA build), ultra blue wrap (cactus gray underneath), OG Texas Group buy Bronco, less miles than my new toy

Now: 2023 Raptor, optioned out (except the graphic which I have ordered), A51, blue interior, stock (for now), 21k miles

 

[Area51BS]

Added even more strategically placed sound deadening in rear strictly for better bass and less rattles. Darn near rattle free now. Did the cargo floor, behind side panels only on larger areas of metal, back side of plastic trim panels and notice the trailer plugs behind panel vibrate. Double layered only wide areas that still vibrated when tapped on. Not an extreme amount. Just enough for results needed. It isn’t a lux car. Would have taken pics except you can’t hear the difference in pics.

 

[cynicalrider]

Installed my rear tire basket and cheap RC tailgate reinforcement. I got it specifically to haul firewood we might cut on the trails/the chain saw. Never fun smelling the fumes inside the cabin.

Untitled by MJH Creations, on Flickr

I relocated the 3rd brake light to mount to the basket and installed a duetsch connector to make it easy to remove if I actually need to use my spare.

Untitled by MJH Creations, on Flickr

 

[Mean Green]

Finally got my shock recall completed. Had my Ford Performance skids (shock tower and rear diff) installed as well. The Ford Performance rear diff cover has not arived yet, so that will have to wait till I get the diff fluid changed.

 

[Oldhippie]

After two slides and 3 years of repairs, highway 1 is now open so took a ride down to Ragged Point for lunch…so pretty and 70 degrees…

 

[Uncanny998]

Drove it. After being in the work car all day I couldn’t wait to get in the Bronco.

 

[Area51BS]

Mountains 2 Metal rear cargo rack LOVE
Mounted fire extinguisher

Any rattles? Looks nice

 

[NativeTexan]

Any rattles? Looks nice

Yes, a few. Going to try to trouble shoot and add some foam pads to one area and possibly oil some others. Just need to keep the tunes up for now.

 

[Bronco Damen]

Breaker one-niner

 

[CG32]

Had my king coilvers and new control arms installed! The ride is great and love the added lift, but the back needs to come up a bit. The shop left it a full inch shorter,, which is frustrating so I will need to do some adjustments or try to take it back to them, but it’s over an hour away and I can probably do it in close to that time. Next up, 37’s and rear control arms.

 

[ThunderFlash]

Big week. Mounted Morimoto 1 Banger lights on my crash bar mounts to use as cornering lights. Still have to get the aiming dialed in the do the FORscan work. They are a bit vulnerable under there with limbs and whatnot churning in the wheel well, but we will see how they hold up. First is headlights, second is new corners, third it both.

Also got a cheapo limb riser kit off Amazon. The hardware seems pretty decent, but the upper bracket is a bit flimsy. I had to do some work to adapt to the TrailRax rack. I was going to mount to the outer wind deflector screws as it was designed with a new hole in the beacket, but I think the deflector is attached with economy style nuts. That could be challenging. Plus, if a nut moved in the slot, I'd have to disassemble the whole front of the rack to get it back together. So I flipped the brackets to the opposite side and upside down, then mounted to the rack rails. As it is, it's not perfect, but I think the will work for fluffier branches. The shunt is rated for 1250 pounds, but extra aluminum turnbuckle I added is only rated for 90 pounds. I don't think the upper bracket would take much more and it can work as a fuse to keep from ripping my trail sight off. I still need to make sure I can get my roof panels off with these in place. I think I can, but it will be very close.

https://a.co/d/iWnODZV

Sponsored