What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[Desmolicious]

Sent back the garbage Weathertech front mudflaps and added the excellent IAG ones!
No drill, super easy, very quick.

Sponsored

 

[ThunderFlash]

I just drove my 2 door Bronco all around God's good earth looking for Torx Plus bits for the modular bumper fasteners so I can get my wife's Christmas present, Baja Designs lights, mounted on our 4 door.​

 

[Deadpool392]

I just drove my 2 door Bronco all around God's good earth looking for Torx Plus bits for the modular bumper fasteners so I can get my wife's Christmas present, Baja Designs lights, mounted on our 4 door.​

Here is the set I got, another member recommended it. Has everything you’ll need.

CASOMAN Master Torx Bit Socket... https://www.amazon.com/dp/B07QL2SWS6?ref=ppx_pop_mob_ap_share

 

[DarthLincoln]

I just drove my 2 door Bronco all around God's good earth looking for Torx Plus bits for the modular bumper fasteners so I can get my wife's Christmas present, Baja Designs lights, mounted on our 4 door.​

Been there, done that. I think Torx Plus is a conspiracy by Bezos and CCP to make us buy tools from Amazon. I couldn’t find them at any hardware store nearby. Only online.

 

[ThunderFlash]

Here is the set I got, another member recommended it. Has everything you’ll need.

CASOMAN Master Torx Bit Socket... https://www.amazon.com/dp/B07QL2SWS6?ref=ppx_pop_mob_ap_share

Been there, done that. I think Torx Plus is a conspiracy by Bezos and CCP to make us buy tools from Amazon. I couldn’t find them at any hardware store nearby. Only online.

Oddly, I found a "Titan" set at the fairly small O'REILLY'S not far from my house. Not sure they will wear well, but I just need to get my "work in process" light install...and just got them mounted, so all's good. Wiring next....I suspect aiming is going to be a b!tch, though.

 

[DarthLincoln]

Fun videos. Unfortunately the YouTube Shorts format resamples the original landscape video into portrait orientation with blur boxes above and below - it kills the resolution and viewing.

 

[RCVBAF]

Oddly, I found a "Titan" set at the fairly small O'REILLY'S not far from my house. Not sure they will wear well, but I just need to get my "work in process" light install...and just got them mounted, so all's good. Wiring next....I suspect aiming is going to be a b!tch, though.

I have those as well. I got them 4 years ago, still working well. It was hard to find TTs.

 

[GreenbeanBob]

Installed a tachometer.

I recorded a video here:
2022 Ford Bronco Tachometer

 

[Desmolicious]

$20 metal alloy phone holder for when I’m using my phone as the screen for my DJI Osmo 4 action cam as a trail cam.
Fits my iphone8 (yes I know..) while in its protective case.

https://www.amazon.com/dp/B0BK994NN5?ref=ppx_yo2ov_dt_b_fed_asin_title

 

[Desmolicious]

https://www.amazon.com/dp/B0CLD6VSZT?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

$19 center console cover to protect against Riley’s claws. Fits perfectly and very comfy.

 

[Desmolicious]

I need to go on an adventure. I’ve had it for two weeks now and all I have done is buy trinkets for it…

 

[orion]

Post a pic when you do this, I’d like to reduce the shake as well. I love mine, both for storage and leveling out when sleeping in the B.

Finally got my permanent solution done, just need to paint them up.

I bought Dorman hood mount bumpers. Part Number 42206. Two pieces of 1/8" - 2"x2" angle 5" long. I then used 10-24 ½" Socket Head Cap Screws to mount the angle iron to the back bottom L-Bracket.

I tapped the Lower L-Bracket to mount the angle iron to it. I then tapped the angle iron to accept the hood bumper.

 

[orion]

Also built a mount for my diff breather kit. Will be running the lines and connecting both diffs, tranny, and transfer case.

 

[CarbonGrayBronco]

Took advantage of the (brief) unseasonably warm weather this weekend and washed tons of salt and grime off while I could.

 

[glashaus]

Drove from Lake Charles La back to Houston, man I really love my Bronco!

Sponsored