The BEST Suspension is HERE: Bilstein 8112 DSA+ for Ford Bronco!

[BroncoStorm]

Just incase you missed it I ran into the Bilstein guys in Johnson Valley and we did a little video shoot with these bad boys. If you have any questions DM me. I've gotten more seat time with the 8112 DSA+ and WOW, what they do to uplevel the platform is truly insane.

Sponsored

 

[NDM_84]

I know exactly what to do now lol

1. 74Weld Portals
2. 74Weld Steering Rack
3. Icon Tie Rods
4. Billstein 8112 Coilover Shocks
5. RPG Upper & Lower Control Arms, links, and Track Bar
6. RCV Axle Set - Ultimate IFS CV Axles
7. New Wheels and Tires
8. JKS Tire Clearance Kit

Are we at $40k minimum lol

Bronco Raptor R may look cheap now lol

 

[Bronc69]

I got the 8112 installed along with the APG upper control arms.
Plus, the Johnny Joint lower links (APG said I wouldn't need the uppers), 74 Weld steering rack and the Next Venture rear diff cover and skid plate for the rear diff (I have the aluminum full skids on order).

I have them on for about a month and have the high-speed compression fully backed off for the street. The ride is quite a bit better than the stock Fox shocks. They react so much quicker and are able to stop the entire rig from bouncing over bumps. Handling is no different and dive under hard braking is improved.
I do not have any off-roading done yet. April is crazy busy with spring-break, horse shows and birthdays. Will be getting out there soon fingers crossed.

Overall, super happy with the setup. Did a 1" lift over stock ride height. Once I get the skids installed, I'll be good-to-go.

 

[Caleb@PandaMotorworks]

Just a heads up:

Bilstein is having a price increase TOMORROW JULY 1

If you have been thinking about these, this is the LAST CHANCE to get them at their current price. All orders will need to be submitted TODAY to secure current pricing.

These kits will be $400 more starting tomorrow.

I can still give a discount on them, so shoot me a message!

 

[Bronc69]

Just a heads up:

Bilstein is having a price increase TOMORROW JULY 1

If you have been thinking about these, this is the LAST CHANCE to get them at their current price. All orders will need to be submitted TODAY to secure current pricing.

These kits will be $400 more starting tomorrow.

I can still give a discount on them, so shoot me a message!

Great guys to deal with if you want to get these. I got mine through Panda. Zero issues and quick deliver.

 

[BroncoStorm]

I can attest after 3000 hard miles these are the bees knees.

 

[crenca]

Just a heads up:

Bilstein is having a price increase TOMORROW JULY 1

If you have been thinking about these, this is the LAST CHANCE to get them at their current price. All orders will need to be submitted TODAY to secure current pricing.

These kits will be $400 more starting tomorrow.

I can still give a discount on them, so shoot me a message!

I have little doubt these are as good as it gets, at least for what I want out of the Bronco suspension on/off road. Thing is they are priced out of my budget for now.

Question: Have you had anyone do an install keeping the stock SAS springs, at least for the front (maybe you can not with rear)?

 

[Bronc69]

I have little doubt these are as good as it gets, at least for what I want out of the Bronco suspension on/off road. Thing is they are priced out of my budget for now.

Question: Have you had anyone do an install keeping the stock SAS springs, at least for the front (maybe you can not with rear)?

I'm not sure why you'd want to use the stock SAS springs. The shock valving has been designed around the spring rates that are used by Bilstein. I wouldn't mess with anything else.

 

[crenca]

I'm not sure why you'd want to use the stock SAS springs. The shock valving has been designed around the spring rates that are used by Bilstein. I wouldn't mess with anything else.

Good point.

On the other hand, many (most?) aftermarket shock/coil over manufactures appear to have a 'one size fits all' when it comes to spring rates - or at least a target Bronco and/or use case in mind. I am not sure how many different spring rates Ford has for the various flavors (doors, trim levels - and thus wieght) of Bronco's. I recall reading somewhere here that there are more than half a dozen different spring rates from the factory just for SASed Bronco's.

This begs the question, which Bronco (i.e. what weight) were the 8112's springs designed around? OR is there a selection of multiple spring rates available?

I suspect the answer is something like "your standard 4 door Badlands or Wildtrack" which would work for me, but I would want to know.

 

[BroncoStorm]

Good point.

On the other hand, many (most?) aftermarket shock/coil over manufactures appear to have a 'one size fits all' when it comes to spring rates - or at least a target Bronco and/or use case in mind. I am not sure how many different spring rates Ford has for the various flavors (doors, trim levels - and thus wieght) of Bronco's. I recall reading somewhere here that there are more than half a dozen different spring rates from the factory just for SASed Bronco's.

This begs the question, which Bronco (i.e. what weight) were the 8112's springs designed around? OR is there a selection of multiple spring rates available?

I suspect the answer is something like "your standard 4 door Badlands or Wildtrack" which would work for me, but I would want to know.

The spring rates were designed around a 4 door badlands and 2 door badlands. The adjustability for the DSA "Dual Speed Adjustment" and hydrolic bumpstop allows you to dial them in for more or less weight, depending if you have a more desert runner build or an overland build with winch etc...

 

[crenca]

The adjustability for the DSA "Dual Speed Adjustment" and hydrolic bumpstop allows you to dial them in for more or less weight, depending if you have a more desert runner build or an overland build with winch etc...

Sort of...obviously adjusting damping can help, within an certain range, but it is springs and not dampers that fundamentally support the weight of the vehicle and the basic behavior of the suspension with said weight. Beyond wieght, spring rates also effect basic suspension behavior (e.g. compliant vs. less roll, etc.) I would say that in general folks focus too much on shocks and not enough on springs when thinking about modding for this or that attribute.

@87-Z28 has several threads around here I am too lazy to link that explicate all this.

In any case, it would seem I'm well within the "target" design of this particular suspension mod when it comes to weight, and the fact that these coil overs are not about altering stock geometry for lift, etc.

 

[87-Z28]

These shocks, with all of the variable damping, can probably hide some of the concerns with one size fits all spring rates. As long as the static weights or pitch and roll moments don’t change too much. That is probably why they offer two flavors based on wheelbase, 2 door and 4 door. They have an impressive amount of variable damping, including both compression and extension I believe.

static weight is carried by the spring rate dictating static ride height, ie, damper has no effect on this.

Spring rate, along with static weight, also dictates fundamental frequency response, ie, damper has no effect on this.

generally speaking, the spring rate dictates fundamental suspension response and damping fine tunes that response.

 

[BroncoStorm]

Also, in case you all missed i,t here's some more info and review. https://www.bronco6g.com/forum/threads/bilstein-8112-dsa-better-than-hoss-3-0.110529/

 

[Bronc69]

FWIW: 8112 spring rates are fronts at 400lbs/in and rears at 288lbs/in

I have my ride height set 1" higher than stock. The ride and handling is extremely similar to the stock suspension. It is however, better controlled over washboard or extremely bumpy roads. I have the high-speed adjusters set completely soft for the road. I don't turn them up until I get off-road.

Hitting the brakes hard doesn't induce as much nose dive either. It rolls forward (shifting weight) and then stops and remains constant from there. Much more control under hard braking.

Since the suspension installation, I've added Next Venture Aluminum skids and a Superwinch. That should be a couple hundred pounds, but didn't notice any real change.

Note: I have the JCR aluminum front bumper. With the winch, it's not much heavier than a steel bumper alone.

 

[Enginerd]

Apologies if this was already posted, although long a good video to watch that came out a couple days ago.

Just received my set and hoping to install in the next few weeks! Thank you @Hotshot Offroad!

Sponsored