Wanting brighter reverse lighting on my 24 Heritage.

[4x4TruckLEDs.com]

Westchester. Nice to know you guys are local!

Ohh yeah only about an hours drive (on a good day)

Sponsored

 

[Denis85]

Ohh yeah only about an hours drive (on a good day)

HAHA depending on that long island traffic.

 

[4x4TruckLEDs.com]

HAHA depending on that long island traffic.

Ohh you got jokes now ehh. Why don't you go make up some more dumb names for sandwiches... (cough) GRINDER (cough)

Nobody outside Westchester will get dig either

(Had an old co-worker who asked me if I wanted a Grinder one day on his way into work... I had NO CLUE what he was babbling on about)

 

[Denis85]

Ohh you got jokes now ehh. Why don't you go make up some more dumb names for sandwiches... (cough) GRINDER (cough)

Nobody outside Westchester will get dig either

(Had an old co-worker who asked me if I wanted a Grinder one day on his way into work... I had NO CLUE what he was babbling on about)

Even worse, they call it a wedge. literally no one else in the country calls it that except for here.

"In some parts of the Northeast, a long sandwich like a hoagie, sub, or grinder is also called a "wedge". This regional term is particularly common in Westchester County, New York, and some parts of Connecticut. The name "wedge" is believed to have originated from an Italian deli owner in Yonkers who shortened the word "sandwich" due to his accent. "

 

[Denis85]

Also wasn't joking. That LI traffic is serious.

 

[4x4TruckLEDs.com]

Even worse, they call it a wedge. literally no one else in the country calls it that except for here.

"In some parts of the Northeast, a long sandwich like a hoagie, sub, or grinder is also called a "wedge". This regional term is particularly common in Westchester County, New York, and some parts of Connecticut. The name "wedge" is believed to have originated from an Italian deli owner in Yonkers who shortened the word "sandwich" due to his accent. "

Ohh that's another one. WEDGE! LOL

 

[VirginiaHeritage]

You are correct. The LEDs are integrated and not serviceable/replaceable. So if you want more brightness, then you need to add extra lights.

If you have the trailer tow option, then a hitch light would be the easiest solution. I don’t have this so I can’t speak to how much light it adds.
https://www.diodedynamics.com/hitchmount-led-pod-reverse-kit-for-2021-2025-ford-bronco.html

Yeah you don’t want that with a capable rear bumper. I tried it and the wire harness and extension plugs end up hanging exposed right in front of the muffler. No room to stow them inside the receiver mount and it will either be visible from behind or rub a bumper nut if you try and tie it up high.

 

[Droz]

I actually bought both kits, the Baja Designs kit and the Diode Dynamics Stage Reverse light kit. I mounted bot up and tested them both, but ended up liking the DD set because of the built in brake lights and th red backlighting. The Diode Dynamics are awesome and very easy to install. Give Adam a call if you have any questions. I ended up repurposing the Baja Designs as secondary ditch lights.

 

[Denis85]

@4x4TruckLEDs.com curious if you can answer this question. Was looking at the Baja Designs website and the kit that attaches to the rear spare tire states "NOTE: This kit will NOT work on the Bronco Raptor and Sasquatch edition models." IS this correct? The photo appears to show it mounted to a sasquatch equipped bronco.

 

[4x4TruckLEDs.com]

@4x4TruckLEDs.com curious if you can answer this question. Was looking at the Baja Designs website and the kit that attaches to the rear spare tire states "NOTE: This kit will NOT work on the Bronco Raptor and Sasquatch edition models." IS this correct? The photo appears to show it mounted to a sasquatch equipped bronco.

bronco raptors have a different bolt pattern

It should fit a Sasquatch - we’ve installed them on those just didn’t use all the spacers they provide is all

you should order from our site btw: https://www.4x4truckleds.com/baja-designs-reverse-kit-for-2021-ford-bronco/

 

[Denis85]

bronco raptors have a different bolt pattern

It should fit a Sasquatch - we’ve installed them on those just didn’t use all the spacers they provide is all

you should order from our site btw: https://www.4x4truckleds.com/baja-designs-reverse-kit-for-2021-ford-bronco/

oh i absolutely will. i was just doing some research. Ill need to get that harness to hit the reverse circuit as i wont have upfitter switches.

thanks for the info!

 

[4x4TruckLEDs.com]

oh i absolutely will. i was just doing some research. Ill need to get that harness to hit the reverse circuit as i wont have upfitter switches.

thanks for the info!

you can add our reverse in line pigtail and just run the Baja designs extension right to our harness and save time: https://www.4x4truckleds.com/crystalux-wp-2-pin-in-line-bronco-tail-light-harness-2021-ford-bronco/

 

[Denis85]

you can add our reverse in line pigtail and just run the Baja designs extension right to our harness and save time: https://www.4x4truckleds.com/crystalux-wp-2-pin-in-line-bronco-tail-light-harness-2021-ford-bronco/

you're beautiful

Sponsored