Do you have a security enclosure for your cargo area?

[EZ4X4]

A few more questions:

Can it stay on whether hardtop is on or off? (I.e. I don’t need to worry about the enclosure once I’ve installed it and don’t need to remove or adjust when taking hardtop off/on?).

Also, how do I pass the electrical and wiper harness down to the retaining clip on the cargo sidewall?

When placing an order, it makes me check a box saying I realize this is a pre-order. When will these be available?

Yes, the EZ Trunk can stay on whether your hardtop is on or off. Once it’s installed, you’re good to go—no need to remove or adjust it when taking your hardtop on or off!

Good news! We just got the shipment in today and will start shipping out orders on Monday! I’ll have our team update the site to reflect that it’s now in stock instead of a pre-order.

For the electrical and wiper harness, there is a hole in the trunk that you can feed the wire through to reach the retaining clip on the cargo sidewall.

Let me know if you have any other questions!

Sponsored

 

[RedTailHawk]

Yes, the EZ Trunk can stay on whether your hardtop is on or off. Once it’s installed, you’re good to go—no need to remove or adjust it when taking your hardtop on or off!

Good news! We just got the shipment in today and will start shipping out orders on Monday! I’ll have our team update the site to reflect that it’s now in stock instead of a pre-order.

For the electrical and wiper harness, there is a hole in the trunk that you can feed the wire through to reach the retaining clip on the cargo sidewall.

Let me know if you have any other questions!

Bingo! Placing my order now!

 

[EZ4X4]

Bingo! Placing my order now!

Thank you for the support!

 

[RedTailHawk]

Thank you for the support!

I ended up also buying the rolling 4 door rack and the hinge alignment. Tried to get the 4 door cover for Bronco but its sold out. Any idea when they’ll be back in stock?

 

[EZ4X4]

I ended up also buying the rolling 4 door rack and the hinge alignment. Tried to get the 4 door cover for Bronco but its sold out. Any idea when they’ll be back in stock?

Thanks for your order! We just got some 4-Door Covers in today, so I’ll update the stock now!

You can grab it here: EZ4x4 Bronco 4-Door Cover

Let me know if you have any other questions!

 

[markpilip]

I don't want to have to remove all my gear from the cargo area anytime I go out with the hardtop off. I'm looking into a security enclosure to keep my stuff hidden and somewhat protected. Do they rattle? Anyone have feedback on the pros and cons of these security enclosures?

I've had my Slipstream from Diabolical since June 2022. No rattles or creaks since then. I just used the pass-through flip down earlier this week when hauling some brush.

I think I got it for just around $1K when I bought it. I know price has gone up a lot since then. Would I pay $1.6K for it, with other options apparently available now? Not sure, but because I haul around some relatively valuable stuff, I have to have some kind of security enclosure.

 

[RedTailHawk]

Thanks for your order! We just got some 4-Door Covers in today, so I’ll update the stock now!

You can grab it here: EZ4x4 Bronco 4-Door Cover

Let me know if you have any other questions!

Sweet. Just ordered those too!

 

[Solfive]

I have the diabolical and love it, I’ve never heard a single creak from it. It’s certainly pricey but I got it when it was newly released and less costly. That being said, my thought process is one stolen laptop or camera etc will cost the same or more to replace. I would’ve really liked a proper slide out floor like Ford offers but instead went with Diabolicals slide tray and use it for seating. Sometimes I put stadium seats from my RTT on the slide and it works well. It’s great that there are multiple options now, probably can’t go wrong with any of them.

 

[iamcris]

I have the Diabolical slipstream. Cost me about $1000ish. Peace of mind and worth it. I can park wherever and not worry about my stuff getting jacked.

 

[TrailRaider]

Used the Ford/Tuffy for a while. I got it cheap and heavily modified it. I didnt like the fact it negated the ability to utilize the folding seats because in a 2 door you REALLY need that space
Made it fully folding and openable when needed, but still fully secured when the top is off.
I have since removed it and am building something different. Its difficult for companies to built something for everyone.
but something that is foldable in a vehicle that has folding seats seems like it should be a no brainer.

 

[RedTailHawk]

Used the Ford/Tuffy for a while. I got it cheap and heavily modified it. I didnt like the fact it negated the ability to utilize the folding seats because in a 2 door you REALLY need that space
Made it fully folding and openable when needed, but still fully secured when the top is off.
I have since removed it and am building something different. Its difficult for companies to built something for everyone.
but something that is foldable in a vehicle that has folding seats seems like it should be a no brainer.

I ended up getting the EZ4X4 for this very reason. Folding it out of the way is a necessity for me

 

[RedTailHawk]

Update on my EZ4X4 security enclosure...
Received mine yesterday and immediately started to install it. Got halfway thru and realized that it didn't have clearance to fold to collapse as it was constrained by the Bronco Raptor d-pillar cross brace. I sent a note to @EZ4x4 and the owner, Brian, personally called me back. We ended up making a couple mods to the enclosure unit and got it working. I had to remove 2 bushings and used my angle grinder to trim 1/4" off the end of the shelf ledge on each side. After the prototyping proved successful, Brian said he will incorporate the modifications into his product and send me freshly manufactured parts to replace the parts I modified. What can I say...a great quality product and amazing customer service. (As an aside, I also bought the EZ4X4 4 door rolling cart, which is also quality and highly functional. Keeps my doors securely stored.). An extra bonus, while installing the enclosure, it occurred to me that it may interfere with the Additive Desert Design molle panel I had just installed on the tailgate, but they both fit together perfectly. See pics and video of the process and finished product.

Next I need to decide if it is worth it to trim the cargo rubber mat (the enclosure slightly narrows the cargo area) or find something that fits.

 

[CoffeeSquatch]

Update on my EZ4X4 security enclosure...
Received mine yesterday and immediately started to install it. Got halfway thru and realized that it didn't have clearance to fold to collapse as it was constrained by the Bronco Raptor d-pillar cross brace. I sent a note to EZ4X4 and the owner, Brian, personally called me back. We ended up making a couple mods to the enclosure unit and got it working. I had to remove 2 bushings and used my angle grinder to trim 1/4" off the end of the shelf ledge on each side. After the prototyping proved successful, Brian said he will incorporate the modifications into his product and send me freshly manufactured parts to replace the parts I modified. What can I say...a great quality product and amazing customer service. (As an aside, I also bought the EZ4X4 4 door rolling cart, which is also quality and highly functional. Keeps my doors securely stored.). An extra bonus, while installing the enclosure, it occurred to me that it may interfere with the Additive Desert Design molle panel I had just installed on the tailgate, but they both fit together perfectly. See pics and video of the process and finished product.

Next I need to decide if it is worth it to trim the cargo rubber mat (the enclosure slightly narrows the cargo area) or find something that fits.

Okay I'm so glad they found a solution. Was in the same boat with my Raptor and the install. Waiting for a call back from the owner. I was thinking of removing those rubber/plastic cylinder spacers, is the angle grinder the only way it fully works?

 

[RedTailHawk]

Okay I'm so glad they found a solution. Was in the same boat with my Raptor and the install. Waiting for a call back from the owner. I was thinking of removing those rubber/plastic cylinder spacers, is the angle grinder the only way it fully works?

Angle grinder (well the cutting wheel) took a minute per side. Then rounded off the sharp corner with the grinding disc. Gets you a quick solution. Or reach out to EZ4X4...

 

[CoffeeSquatch]

Angle grinder (well the cutting wheel) took a minute per side. Then rounded off the sharp corner with the grinding disc. Gets you a quick solution. Or reach out to EZ4X4...

Did your fix, thank you so much, works so well now!

Sponsored