What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[CitrusBronco]

This past weekend I used my winch and snatch block for the first time to clear a tree from a trail so I could pass. Found a cool ravine to climb out of also. Little hairy as it stared raining and I was alone, no front camera or spotter but everything worked out and had a good time.

Sponsored

 

[dgorsett]

Went for a reunion/fishing/kayaking trip

 

[lwilliams34]

Took the Bronco to my detailer to touch up the retro fender badges.
I had the truck ceramic coating applied with the original "fridge magnet" badges still intact. I should have removed before coating, but wasn't sure about how the replacement would go. Once I added the new badges you could clearly see the uncoated areas of the fender.
.

 

[lwilliams34]

Installed matte black hood vinyl combined with a gloss black "big bend" overlay.
.

 

[lwilliams34]

Upgraded the stock sound system with a JBL amp and replacement speakers.
Also had Sound Skins sound deadening installed in the full interior and doors.
A huge difference in sound quality, especially from the rear speakers. Sound deadening has made the interior ride quieter.
.

.

 

[REKCUF]

Went exploring at Rowher Flats today.

 

[Kach Vartan]

Went exploring at Rowher Flats today.

Nice! I still need to get out there. Closest OHV park to me. How was the weather?

 

[REKCUF]

Nice! I still need to get out there. Closest OHV park to me. How was the weather?

 

[Kach Vartan]

Pretty mild!

 

[GroovyGeek]

@lethalchristy : I still need to get to HardRock.....I hear its a great park.

I did the installation of the pull-down grab handles with the LED light. I had Mabbet lights in place with Spartan 7 Grab handles, but because of the DV8 Crossbar I installed, and some complaints about my Spartan handles, I decided to go with these pull-down from Lumen.

Honestly, they do feel better and are made quite well. The light they give off is also good, not so concentrated as the Mabbet light was.

Just when I thought that I am done spending money. Those handle lights look good and so does the dome light. Might get them around the end of year sales.

 

[cynicalrider]

Been slowly working on some exterior camp lights to go with the interior ones I recently installed. I kept getting insta ads for Kingpin lighting, they appealed to me because I can swivel each 12" light bar independent of each other.

Untitled by MJH Creations, on Flickr

Trying my best to keep everything looking factory.

Untitled by MJH Creations, on Flickr

 

[Oldhippie]

Took it the dealer for an oil change…they also washed the summer dirt and mud off so that is a win…

 

[CitrusBronco]

Been slowly working on some exterior camp lights to go with the interior ones I recently installed. I kept getting insta ads for Kingpin lighting, they appealed to me because I can swivel each 12" light bar independent of each other.

Untitled by MJH Creations, on Flickr

Trying my best to keep everything looking factory.

Untitled by MJH Creations, on Flickr

That looks like it adds some great lighting. I need to do something like this since its so dark in the back.

 

[CitrusBronco]

I added some lights up front, here is a link if you want to check it out Auxbeam light install

 

[G1D1UP]

@lethalchristy : I still need to get to HardRock.....I hear its a great park.

I did the installation of the pull-down grab handles with the LED light. I had Mabbet lights in place with Spartan 7 Grab handles, but because of the DV8 Crossbar I installed, and some complaints about my Spartan handles, I decided to go with these pull-down from Lumen.

Honestly, they do feel better and are made quite well. The light they give off is also good, not so concentrated as the Mabbet light was.

Welcome to the club! Those look great and offer so much light. Did you get the UFO dome light or cargo light? With those other lights added, its soooo bright, you can land rogue Boeing jets that veer off course.

Sponsored