Forscan unlocks all GOAT modes with any Bronco model trim! How-to DIY instructions

[KyTruckPlant]

https://www.motorcraftservice.com/Home/SetCountry?returnUrl=/AsBuilt

you can download your factory as built data from there.

I had already downloaded that. Its a simple as loading that into FORSCAN and uploading to that module?

Sponsored

 

[GaryB2220]

I had already downloaded that. Its a simple as loading that into FORSCAN and uploading to that module?

Im hoping someone that has done it will answer your question. I have not had to go through with that process before. I did go to that site and downloaded the file before i ever first used forscan. At this point, i am unsure because it is just one file. And all of our as built module data is broken up into many individual files.
You may have to dig deeper in google or youtube videos to find out how to restore your factory settings from that one file.

 

[KyTruckPlant]

Im hoping someone that has done it will answer your question. I have not had to go through with that process before. I did go to that site and downloaded the file before i ever first used forscan. At this point, i am unsure because it is just one file. And all of our as built module data is broken up into many individual files.
You may have to dig deeper in google or youtube videos to find out how to restore your factory settings from that one file.

I got it sorted out.
Forscan will connect and download your as built data for you, provided you are connected to the webz.

 

[BadmansSAS]

I am having the same problem. Did you get any response?

This comes in the email from forscan after you have purchased the extended license. Its $12.

 

[BadmansSAS]

Not sure if this has been updated for a while, but I just used the latest version of FS 2.3.59 with my older style cable with the MS/HS manual switch and was able to enable sport mode on my BL SAS 2023 model in about 10 seconds. Maybe FS was updated or the tune on my 23 was, but I have both the As-Built and the plain english options in forscan. No more needing to update the HEX code. You pick the ABS module that doesnt say "As-Built" next to it and within that module its just a drop-down from disable to enable. Then write.

All done and tested. Works flawlessly. Sport mode is there now along with all the other GOAT modes. And when its on, truck goes into 4a automatically and turns off auto start/stop. Then throttle response is way more sensitive, shifts hold a lot longer and it even sounds meaner...lol Probably different TI-VCT settings even. But it was totally worth the 10 seconds of work. I already had the cable and extensive knowledge of forscan with my 2022 mustang GT.

 

[Cux211]

Not sure if this has been updated for a while, but I just used the latest version of FS 2.3.59 with my older style cable with the MS/HS manual switch and was able to enable sport mode on my BL SAS 2023 model in about 10 seconds. Maybe FS was updated or the tune on my 23 was, but I have both the As-Built and the plain english options in forscan. No more needing to update the HEX code. You pick the ABS module that doesnt say "As-Built" next to it and within that module its just a drop-down from disable to enable. Then write.

All done and tested. Works flawlessly. Sport mode is there now along with all the other GOAT modes. And when its on, truck goes into 4a automatically and turns off auto start/stop. Then throttle response is way more sensitive, shifts hold a lot longer and it even sounds meaner...lol Probably different TI-VCT settings even. But it was totally worth the 10 seconds of work. I already had the cable and extensive knowledge of forscan with my 2022 mustang GT.

Within the ABS module does it say goat modes ?

 

[BadmansSAS]

Within the ABS module does it say goat modes ?

No it just has them all listed out by name in forscan and my sport mode line item was disabled. Edited that line, changed the drop down to enabled from disabled, and clicked write. Car resets and its done. I also went back in and disabled the ECO mode and thats gone now in the GOAT modes.

 

[Cux211]

No it just has them all listed out by name in forscan and my sport mode line item was disabled. Edited that line, changed the drop down to enabled from disabled, and clicked write. Car resets and its done. I also went back in and disabled the ECO mode and thats gone now in the GOAT modes.

Thanks

 

[GT4]

Hi guys...I haven't found an answer to this yet, so hopefully one of you knows. Have a 2023 Bronco BL SAS, and just got the FP Procal tune done yesterday! If I want to add sport mode via Forscan, will there be any issues since I would be adding it *after* the tune? Want to know if anyone else has done this.

 

[Ducati1098]

Hi guys...I haven't found an answer to this yet, so hopefully one of you knows. Have a 2023 Bronco BL SAS, and just got the FP Procal tune done yesterday! If I want to add sport mode via Forscan, will there be any issues since I would be adding it *after* the tune? Want to know if anyone else has done this.

Forscan and the procal have nothing in common. Doing it before or after the tune won’t make a difference

 

[GT4]

Forscan and the procal have nothing in common. Doing it before or after the tune won’t make a difference

That's what I was thinking, but wanted to make sure. Thanks. Will dealerships completely avoid using Forscan to do this for us?

 

[Ducati1098]

That's what I was thinking, but wanted to make sure. Thanks. Will dealerships completely avoid using Forscan to do this for us?

Probably most, yes.
All dealerships are different though

 

[Gadgets4grls]

Has anyone else experienced this.
Just got my 2024 BL and enabled Sport mode and everything seemed to go alright, but now when I go to the mode that are supposed to auto enable the front lockers it doesn't.
Honestly I can't remember if this was an issue before I did the change or not and rather than restoring to as-built and attempting it again I wanted to see if this might be a know issue.
I didn't catch it in this thread but it's forty pages so I might have missed it.
Thanks

 

[CalvinT]

Only Sand, Mud and Rock lock the front lockers. You can select them in other modes, but they're not automatically selected.

Not sure what you mean by "auto enable."

 

[Gadgets4grls]

Looking at the "Modes" chart in the forscan spreadsheet it indicates that in Sand, Mud, Rock the front and back locker should automatically engage.

I didn't pay that much attention before I applied the Sport patch but now when I go to those modes, because I specially looking for issues, the back locker engages but not the front. I can manually engage it by pressing the button but it doesn't come on automatically like the back does and I'm trying to figure out if I should restore the as-built and attempt the Sport patch again or if this is a known issue on the 24 BL edition.

Rather than doing repeated changes I wanted to check and see if anyone had experience with this.

I know's it's not a make or break deal since I can turn it on with a button press but just trying to get a clear handle if this might be an indication that something went wrong when enabling Sport.

Thanks

Sponsored