What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[CarbonSteel]

I changed the right rear transmission skid plate bolt to a metric equivalent versus the 3/8" bolt supplied with the skids. All other (either OEM or supplied by RCI) bolts are a 15MM socket, but this one is a 9/16" which is just asinine.

Yeah, it's a small thing, but a PITA when you are under the vehicle, and you forget. @RCI Offroad makes decent skid plates, but their choices of fasteners are complete SHITE. I posted about this when I installed them.

Sponsored

 

[cynicalrider]

I changed the right rear transmission skid plate bolt to a metric equivalent versus the 3/8" bolt supplied with the skids. All other (either OEM or supplied by RCI) bolts are a 15MM socket, but this one is a 9/16" which is just asinine.

Yeah, it's a small thing, but a PITA when you are under the vehicle, and you forget. @RCI Offroad makes decent skid plates, but their choices of fasteners are complete SHITE. I posted about this when I installed them.

Literally do this to both my rigs. Fuck having SAE bolts on a metric truck.

 

[Acadist]

Got home last night and got to add the Off-Roadeo swag from earlier in the week. Pokey was disappointed he did not get to go but he understood that it was to make his experiences n the future even better!

 

[mpeugeot]

Wish I could post pictures of what I did, but I decided to pull out the Kicker 48TRTP122 (which had good sound) and decided to try a budget tailgate subwoofer box with a $59 JVC CW-DR104 for now.

I think that I will end up moving the 12" kicker speaker into the enclosure, but I definitely like how it gets the subwoofer out of the way and the relatively clean look overall. Sounds almost as good as the Kicker 48TRTP122, but I could definitely tune it in with the MoBridge amp to have the same outcome I think.

For some reason my browser on my phone is acting strange with the pictures.

 

[Big Norwegian]

With deliveries just around the corner, let's kick this off. Anything pretty much goes from major mods, regular maintenance, a good wash and wax or coated it mud off roading.

With deliveries just around the corner, let's kick this off. Anything pretty much goes from major mods, regular maintenance, a good wash and wax or coated it mud off roading.

Went to the musky show,spent a bunch of money on stuff that I don't need, took my wife for lunch, great day for a ride in the bronco

 

[MillerAndCheeto]

Do the traction boards hit the tail light when you open the tailgate? Wondering if I'd need a tailgate limiter if I went with the same setup.

Yes you are correct. Maybe 10-15 degrees past 90 is all it will go before it would smash into the tail light and completely crush it.

I have the M2M tailgate limiter in the mail! Until then I'll just have to be careful.

 

[Solfive]

I mounted an Aspen Lite that’s been in the garage for a couple of months. Hopefully I’ll get some actual camping photos asap.

 

[5GENIDN]

I cut my capable bumper to fit my tires....

 

[HolidayDog]

We went to the beach. Tried out Trail Turn Assist TTA for the first time. Much better than ASS!

Kids had a blast!

This thing is seriously very very fun.

 

[GI_Jo_Nathan]

I cut my capable bumper to fit my tires....

I'm surprised you haven't taken those off. I removed those plastic pieces from mine a long time ago.

 

[Bee Bop]

Drove my Bronco 200 miles Round trip to rescue another Pony, a 2024 Blue Ember Dark Horse. Don't worry Gordon came back as well.

 

[5GENIDN]

I'm surprised you haven't taken those off. I removed those plastic pieces from mine a long time ago.

I like having the back side of those attached. What is left covers and protects the wiring and the back side of the sensors and fog light.... Besides I think the cut from the side view actually continues the "line" of the fender. Without what plastic I left that the sight line would have a major jog in it... While completely removing them would accomplish the task... I think aesthetically it flows better.

 

[mjcutri]

5 tire rotation and then enjoyed the beautiful weather driving around with the top panels and rear windows removed.

 

[CarGuy]

Post-winter detail. Lots of salt to get off.

 

[Callelk]

More Forscan work:

Remote Panic Button to double click
TPA to 25 lbs

Hard Wired my Garmin Tread power cable

Added B-Pillar overlays:

Sponsored