What are you using for rear cargo inside lighting solutions

[mpeugeot]

Grabbed a 39” off Amazon. Hooked to power, I have remotes to turn it on and off, or it auto offs when the accessories shut off if left on.

Remotes for a 100 yard range. Hitting lock or unlock will send power to it. Have a remote by the tailgate, drivers visor, and on my key chain.

With it being on the bar itself, it’s never in the way, and it never has to come out.

That's pretty sweet.

Sponsored

 

[evgenyvasenev]

The Quake LED cargo area 39” lightbar!

Is it overpriced: yes
Is it well thought out: yes
Did it ship with cheap splicers I replaced with positaps: yes!

Am I happy!?: you bet your ass I am. My cargo area and everything behind my vehicle when using the tailgate table is extremely well lit.

Do you know if it could be mounted to a hard top? The photos show only a soft top.

 

[JimboSlice]

Could it be mounted to a hard top? The photos show only a soft top. And how do you plug it?

Yes, they have instructions for both tops.

 

[doccoch]

https://www.bronco6g.com/forum/threads/let-there-be-interior-light.53345/

 

[DangerMTBBronco]

I ended up using a Baja Designs dome light.

 

[Tye]

I ended up using a Baja Designs dome light.

any pics of how this looks on?

 

[msg]

Yes, they have instructions for both tops.

I am thinking to buy it now that it is on sale. Has anyone mounted the quake light to be turned on/off with the aux switches? I have yet to use one of the aux switches and this seems such a natural use for one....

Edit: Also, the install video I found puts them "in the middle", i.e. at the bottom of the window. Is that the best place? I would imagine that near the top make more sense?

 

[DangerMTBBronco]

I am thinking to buy it now that it is on sale. Has anyone mounted the quake light to be turned on/off with the aux switches? I have yet to use one of the aux switches and this seems such a natural use for one....

Edit: Also, the install video I found puts them "in the middle", i.e. at the bottom of the window. Is that the best place? I would imagine that near the top make more sense?

I wouldn't use an aux switch for this light. Doesn't make sense to have to get into your cab everytime you want to turn on the cargo light. Just hardwire to the existing 12 volt option in the cargo area.

 

[pharden]

I use one of these REDLITHIUM USB ROVER Pocket Flood Light (milwaukeetool.com) Its magnetic so I attached it to the roll bar. its also easy to move around if needed and can be recharged with a USB.

 

[JimboSlice]

I am thinking to buy it now that it is on sale. Has anyone mounted the quake light to be turned on/off with the aux switches? I have yet to use one of the aux switches and this seems such a natural use for one....

Edit: Also, the install video I found puts them "in the middle", i.e. at the bottom of the window. Is that the best place? I would imagine that near the top make more sense?

I think someone mentioned it would be a lot of work and a lot of panel removal to hook it up to the aux switches. I am sure it is doable.

Looks like you have the hard top. I did think about that when I looked at the hard top install. Installing at the bottom would give you light on the ground when the window is up, but less light in the cargo area, unless I am missing something.

You have the LUX package so whatever you do, DO NOT try install their on/off switch in the location they say too. The subwoofer is behind there an it won't fit. I found out after drilling the hole.

I do like it and it provides ton's of light

 

[msg]

I think someone mentioned it would be a lot of work and a lot of panel removal to hook it up to the aux switches. I am sure it is doable.

Looks like you have the hard top. I did think about that when I looked at the hard top install. Installing at the bottom would give you light on the ground when the window is up, but less light in the cargo area, unless I am missing something.

You have the LUX package so whatever you do, DO NOT try install their on/off switch in the location they say too. The subwoofer is behind there an it won't fit. I found out after drilling the hole.

I do like it and it provides ton's of light

You are right on, I do have the hard top and lux. I do have other lights for the "outside" so this light is mostly for looking for stuff inside and also I have the deepsleep mattresses so we camp inside the car.

Thank you for the warning about the subwoofer! Are there alternative instructions to put the light on the top / install the button with the lux package?

 

[JimboSlice]

You are right on, I do have the hard top and lux. I do have other lights for the "outside" so this light is mostly for looking for stuff inside and also I have the deepsleep mattresses so we camp inside the car.

Thank you for the warning about the subwoofer! Are there alternative instructions to put the light on the top / install the button with the lux package?

This is where I put my on/off switch.

https://www.bronco6g.com/forum/thre...te-lighting-qte1306.42507/page-3#post-1679951

 

[RDTC]

Installed 2 lights attached to the roll bar. 12 Watt lights, $30 on Amazon. $14 Wire harness with relay, Amazon.

Ran the wires behind the plastic roll bar covers and pillar cover.

Puts out great light. Lights up the area behind the Bronco nicely.

 

[AK007]

Installed 2 lights attached to the roll bar. 12 Watt lights, $30 on Amazon. $14 Wire harness with relay, Amazon.

Ran the wires behind the plastic roll bar covers and pillar cover.

Puts out great light. Lights up the area behind the Bronco nicely.

Can you share the link?

 

[JohnnyBronco]

Easy install. Tapped off the center dome light. Just pop it out and the wires are right there. Put the remote hook up in there too. It won’t work like that light does, but can supply power for it. It fits in that spot on the bar damn near perfect.


Light bar $59.99
https://www.amazon.com/gp/aw/d/B076KR77Y9?psc=1&ref=ppx_pop_mob_b_asin_title

Remote kit. $25.99 These things are the best. Can run about anything 12v with it up to 30 amps
https://www.amazon.com/gp/aw/d/B09MD63LY6?ref=ppx_pt2_mob_b_prod_image

No center dome light on a softtop. In fact no frigging front seat light when doors open other than the low light ambient that are only there so you can find the switches for the also poor lights under the mirror.

I need some door operated switches and drill holes I guess since the factory door switch system cannot be tapped for aux lighting

Sponsored