Show us your installed wheel / tire upgrades here! (Pics)

[mpeugeot]

Question, if you get a non-sasquatch package but still what to upgrade the tires, do you need to remove the crash bar? If so, how do you do that?

You pay a mechanic.

It really depends on the size of tire and offset of rim. Given the right size and offset, you may or may not need to remove the crash bars.

Sponsored

 

[ryannshit]

Same wheels as before but upgraded to 37s since these photos:

https://www.bronco6g.com/forum/thre...upgrades-here-pics.18511/page-91#post-1409237

 

[NoloBronco]

'22 Badlands Sasquatch fit with 1/4" wheel spacers and BF Goodrich 37x12.50R17 Mud-Terrain KM3 tires (no issues)

What spacers did you install?

 

[Danny's Bronco]

Method 703's 17" x 8.5" 35mm offset
Mickey Thompson Baja Boss AT's 285/70 17
Just a lil poke... Loving them so far. Thanks to everyone that helped me with the offset questions

 

[mattymik]

Method 703's 17" x 8.5" 35mm offset
Mickey Thompson Baja Boss AT's 285/70 17
Just a lil poke... Loving them so far. Thanks to everyone that helped me with the offset questions View attachment 381917 View attachment 381918


View attachment 381917



View attachment 381918

I love those. Great choice.

 

[Danny's Bronco]

 

[Danny's Bronco]

Sorry I did bad adding the pics! Wheels still have some grease from when they seated the beads on them I need to give her a bath this weekend when I get a minute

 

[DarkHorseDarling]

What spacers did you install?

VLAOSCHI Forged 6x5.5 6x135... https://www.amazon.com/dp/B0928D1S9R?ref=ppx_pop_mob_ap_share

 

[NoloBronco]

VLAOSCHI Forged 6x5.5 6x135... https://www.amazon.com/dp/B0928D1S9R?ref=ppx_pop_mob_ap_share

Thank you

 

[FatRat250]

I Know some people on here have gotten 37s to fit with stock 3rd brake light bracket. 37s differ in true diameter by Manufacturer, and less air in it will make it smaller also.

I have 37s on mine, Sasquatch carrier, but got the Hammerbuilt tailgate reinforcement and brake light extension, which has both sets of holes on it. Can look at it on their site see if its worth it to you.

Can the hammerbuilt hold a hi-lift, do they make a mount? Interested to see it please - thanks

 

[FatRat250]

Fifteen52 Range HD with BFG KO2s. 0 offset, had to remove mudflaps - they rubbed at full lock. 2 inch lift with Eibach coil overs, little (very little) poke, no rubbing now. (SAS so no crash bars)

 

[FUB6G]

Fuel Assault 17" wheels, BFGoodrich KM3's 37x12.5x17, with roughly a 2.25 lift (I've got a HOSS 3.0 Wildtrak and so we are piecing together the lift keeping everything within factory specs). First picture is with Wildtrack 35s with lift (makes those 35's look tiny!!!), second picture is with lift and new wheels and tires...

1st, nice rig! 2nd, Could you share the specs on your lift, and what you had to do to work with the 3.0, please? Thanks in advance!

 

[phoenix00]

So started with the Zone 3” off-road kit, but the spacers wouldn’t fit with the HOSS 3.0, Off-road Warehouse extremely graciously swapped out the Zone spacers with Icon spacers (which would fit with the 3.0), so it’s the Zone UCAs and the Icon spacers. Rides great, just got the spacers added last week, so haven’t fully confirmed there’s no rub, without the spacers there definitely was, but I’m pretty sure it’s good now…

 

[phoenix00]

And here’s how it looks with the spacers installed… and thanks for the compliment, appreciate it (got so focused on answering the question I forgot my manners!). Let me know if you have any more questions…

 

[g_walk28]

Fifteen52 Turbomac HD Classic Carbon Gray.

Sponsored