Wheel spacers on badlands Sasquatch

[1fast04neon]

anybody have pics of a badlands Sasquatch with wheel spacers and what ones they’re running? We powder coated the beauty rings on our stock wheels and are just looking for a little more poke. I have no experience with spacers and wondering what kind of wear it puts on suspension components? Also what size do I need to not have to cut the oem studs. Thanks in advance.

Sponsored

 

[Frankie945]

anybody have pics of a badlands Sasquatch with wheel spacers and what ones they’re running? We powder coated the beauty rings on our stock wheels and are just looking for a little more poke. I have no experience with spacers and wondering what kind of wear it puts on suspension components? Also what size do I need to not have to cut the oem studs. Thanks in advance.

https://www.bronco6g.com/forum/threads/1-5”-wheel-spacers-with-sasquatch-installed.34423/

 

[ScLeCo]

Everyone says Bora but I like Bonoss 7075 aluminum spacers. Bora as far as I am aware doesn't offer a 7075 spacer.

 

[TonkaTruck]

If it’s the poke look you’re going for, why not just get some non-Sas fender flares?

 

[Hogan]

What I did with mine over 1 year ago love it no issues

 

[HeliPilot]

1.5” forget the brand though. Been installed for a year now. No issues.

 

[Frankie945]

Here’s some 1.2 spacers I put on yesterday to give me a zero offset wheel to run some 37s. This is a Sasquatch with standard flares installed.

 

[1fast04neon]

Thanks everyone!! They all look great! I ordered a set last night, I’ll post some pics when they come in.

 

[Stripes136]

I went with 1 inch Bora but I wish I had gone just slightly bigger

 

[1fast04neon]

I ordered 1.5 ksp’s. Well see how it goes.

 

[1fast04neon]

They fit perfect, love the stance, but they rub the mud flap bad at full lock. Gonna see if I can grind it down or have to remove them.

 

[1fast04neon]

Cut the mud flaps back and they’re good to go!!

 

[Mrjay804]

Here’s some 1.2 spacers I put on yesterday to give me a zero offset wheel to run some 37s. This is a Sasquatch with standard flares installed.

Looks good. Are you running the standard SAS flares or just the standard flares?

 

[Frankie945]

Looks good. Are you running the standard SAS flares or just the standard flares?

Standard flares

 

[cgv]

I went with 0.75" Bora Spacers, which gave me the best offset for running 37's and no lift. Just cleared the crash bar mount on the front and the slider in the back. The pockets on the backside of the sasquatch wheels are just deep enough to clear the studs protruding from the spacers. 0.75" is definitely as thin as you can get.

Now that I am on Eibach coilovers, I will either go with 1.25" or 1.5" spacers or 0 offset wheels once I get new sliders installed that have better clearance.

Photo from before I installed the lift with 37s:

Sponsored