New Temu modular bumper

[Langwilliams]

$200 knockoff bumper with $1500 FOG lights noice

I was actually talking about the bracket, I'd buy some amazon lights.

Sponsored

 

[Kboyts]

I ordered these. They look the part and for not any more than I'll use them, I couldn't justify spending $500+ for fog lights.

 

[23OBX2.7]

Temu price was 260, but I got 170 back in credit so under $100 all in.

Good price and the reason Ford buys parts in CN extremely profitable when buy a bumper cover or 9a clip and mark up 1000%+.

Most of the aftermarket stuff is made in CN them maybe coated and packed here and Made in USA occurs...

 

[BroncoA512021]

What’s the bumpers crash rating?

 

[cbrenthus]

Good luck, hope it works out. My cheap ebay modular knockoff, which I assume is the same, was a pain to fit, but I didn't care because I saved so much and once installed I was done with it. However, it rusted a lot for just a single winter and a vehicle that, while used in the winter, I don't put a ton of miles on. It has since been replaced with the OEM modular

 

[Kboyts]

Good luck, hope it works out. My cheap ebay modular knockoff, which I assume is the same, was a pain to fit, but I didn't care because I saved so much and once installed I was done with it. However, it rusted a lot for just a single winter and a vehicle that, while used in the winter, I don't put a ton of miles on. It has since been replaced with the OEM modular

I painted it over the powder cost before installing for that reason.

 

[23OBX2.7]

What’s the bumpers crash rating?

None of the aftermarket stuff is DOT or certified for safety unless it's a German market product then must be TUV tested and certified if used on the road. That's why everything has a disclaimer like for off road use only.

 

[Kboyts]

None of the aftermarket stuff is DOT or certified for safety unless it's a German market product then must be TUV tested and certified if used on the road. That's why everything has a disclaimer like for off road use only.

And I'd definitely take my chances with this all steel bumper over the piece of plastic that came stock.

 

[23OBX2.7]

And I'd definitely take my chances with this all steel bumper over the piece of plastic that came stock.

Steel is definitely better for some things especially pushing over stuff while plastic is just the facade on UHS Alloy that weighs maybe 8 lb and DOT tested.

I do like the front bumpers that protrude 18in or so....

 

[Willub]

What’s the bumpers crash rating?

Mosquito impact rated.

 

[BroncoA512021]

None of the aftermarket stuff is DOT or certified for safety unless it's a German market product then must be TUV tested and certified if used on the road. That's why everything has a disclaimer like for off road use only.

I wouldn’t trust anything from temu to save my life.

 

[Kboyts]

I wouldn’t trust anything from temu to save my life.

Guess it's a good thing it's not on your Bronco then.

 

[23OBX2.7]

I wouldn’t trust anything from temu to save my life.

1/2 of big box America sourced from same mfgs....It's risky but can pay off. Respect to OP who had the guts to try it.

 

[dpAtlanta]

Why does it look like it's tilted down?

I had the exact same thought…. but OP never replied to your question.
Tilted or camera angle?
A side shot at bumper height would answer the question.

 

[Woody146]

I had the exact same thought…. but OP never replied to your question.
Tilted or camera angle?
A side shot at bumper height would answer the question.

Def tilted I believe. Pic is from even with the grille or lower and can see the top of the bumper. Was hoping for an answer at least though.

Sponsored